RunRyder RC Helicopter Topic - AR7100R sensor compatible with GV-1??

RR Rated M For Mature

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 357 ONLINE 18 EVENTS SEARCH REGISTER START HERE

1 page

44 views

POST REPLY

Power Helis	.	CANOMOD	.	Experience RC
	.		.

Radio - Servo - Gyro - Gov - Batt > AR7100R sensor compatible with GV-1??

schucb
Senior Heliman
Location: Minnetonka, MN 55345

My Posts This: Topic Forum

Will the backplate sensor from the AR7100R work with a GV-1? I was told I could reverse two wires and it would work.

Brian

11-03-2009 12:39 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE

ErichF
Elite Veteran
Location: Odessa, FL 33556 (Tampa Area)

My Posts This: Topic Forum

I don't know about that, but I use the Spektrum sensor with a GV-1 using the adapter cable sold by AlumaFX.

Erich

11-03-2009 01:13 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

schucb
Senior Heliman
Location: Minnetonka, MN 55345

My Posts This: Topic Forum

I looked at the site http://www.alumafx.com/webstore/

Is the adapter just a servo extension? It must just reverse the two wires.

Brian

11-03-2009 01:33 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE

george0079
Elite Veteran
Location: Tired of the politics

My Posts This: Topic Forum

Quote
Is the adapter just a servo extension? It must just reverse the two wires.

No. That is NOT correct. The GV-1 reads a different signal than the other govs. The Alumafx adapter changes the signal that a standard sensor puts out.

I can please 1 person a day.
It's NOT your day.
Tomorrow's not lookin good, either

11-03-2009 02:14 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE HOMEPAGE GALLERY

schucb
Senior Heliman
Location: Minnetonka, MN 55345

My Posts This: Topic Forum

Ok. I have had success with another brand sensor in the past. I reversed two wires and added a 1k ohm resistor between the power and signal wire.

Brian

11-03-2009 02:38 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE

1 page

44 views

POST REPLY

Heli-Max	.	Hobby Hut	.	Heli Wholesaler
	.		.

Radio - Servo - Gyro - Gov - Batt > AR7100R sensor compatible with GV-1??

Print TOPIC

Advertisers

Subscribe to This Topic