RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 745 ONLINE 80 EVENTS SEARCH REGISTER  START HERE
 
1 page226 viewsPOST REPLY
JR-Spektrum . E-flite . Fast Lad Performance

.
.
e-Thunder Tiger Raptor E Series > E325 Shaking Mini Titan
 
 
toolman18
Elite Veteran
Location: Portland, Texas

My Posts This: Topic  Forum		I know there has been alot of talk on this but i have the shakes again. Cant figure it out.

When i raise headspeed it goes away but the headspeed is already very high. I am running 90-90-90-90-90 in idle 1. If i raise it to 95 it goes away.

I am running a scorpion -8 motor, ace esc, cc10 bec and 2200 zippy packs. I just changed to the fiber frame. The old frame was shaking also. All shafts are straight. pinion is 11T. servos are 65 hb's.

So im pretty sure the problem is in the running gear. One person on here found a motor bearing causing the problem. This is not my problem. The motor is fairly new. Bearings are in great shape. Pinion looks awesome. Not sure. Thanks for the assistance.

Brad

Hope i dont wreck this thing.
11-02-2009 11:23 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Dr Lodge
Elite Veteran
Location: Guildford, Surrey - UK

My Posts This: Topic  Forum		Do you know what your headspeed is? Sounds like it could be the dampners being too tight if raising the headspeed resolves it.

Try running up the heli without any blades and see if the heli still shakes, that will help isolate the problem.

Vibe 90, Vibe 50, Vigor CS x2,
Dyna-x, Knight 503D, Logo 10,
TRex 500, Furion, Gaui EP200
11-02-2009 11:34 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
norsman
Key Veteran
Location: paradise PA

My Posts This: Topic  Forum		Even when I went with the trueblood green dampners which I love ,my mini shaked.But as soon as I went into idleup it was steady as a rock,so I just lived with it.I dont spend much time in normal mode anyways
11-03-2009 12:50 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
toolman18
Elite Veteran
Location: Portland, Texas

My Posts This: Topic  Forum		I think i may have to live with it. I dont know the head speed. Never measured it. The trueblood dampners are what im running. Maybe ill try something different. Maybe even go back to stock. It only does it in normal mode. Any other ideas???

Hope i dont wreck this thing.
11-03-2009 12:56 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page226 viewsPOST REPLY
Ace Hobby . Thunder Power RC . Mikado Modellhubschrauber

.
.
e-Thunder Tiger Raptor E Series > E325 Shaking Mini Titan
 Print TOPIC Advertisers 

Subscribe to This Topic

Saturday, March 20 - 10:20 pm - Copyright © 2000 - 2010 runryder.com | email | link to rr | START HERE | NF