RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 815 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page86 viewsPOST REPLY
Advantage Hobby . Revolution Models . CarbonXtreme

.
.
Gasser Model RC Helicopters > Spectra g part # needed
 
 
TaleGunner
Elite Veteran
Location: Deer Park WA

My Posts This: Topic  Forum		Does someone know the part # for the nylon(or whatever it made of) ball that aligns the clutch and fan for the spectra g. I cant seem to find it in the part listing.

Thanks

CRASH! GLUE! REPEAT!
11-02-2009 10:52 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
ka6fty
Senior Heliman
Location: Sacramento, Ca.

My Posts This: Topic  Forum		http://www.ronlund.com/Merchant2/me...t_Code=MA0546-3

Make sure you tell them it is the one with the large bore.

"Don't put your fingers where you won't put your face"
11-02-2009 11:26 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
TaleGunner
Elite Veteran
Location: Deer Park WA

My Posts This: Topic  Forum		Thanks thats it.

CRASH! GLUE! REPEAT!
11-02-2009 11:28 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
smallplanes
Key Veteran
Location: Timmonsville,S.C. ,USA

My Posts This: Topic  Forum		It might be a dumb question but how is it possible for it to wear out? I'm just wondering?


Thanks

Spectra G 26cc
Jewel
2 Evo 50's
3 Trex 450's
Trex 700
Raptor50
12Z
11-02-2009 11:30 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
TaleGunner
Elite Veteran
Location: Deer Park WA

My Posts This: Topic  Forum		I have never worn one out but with the rubber isolators there is some movement in there and I am sure they can wear.

I am changing gear ratios and putting a new clutch in and the rubber pieces and just figured I would replace the ball as well. for $5 why not be all new in there.

CRASH! GLUE! REPEAT!
11-02-2009 11:41 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
smallplanes
Key Veteran
Location: Timmonsville,S.C. ,USA

My Posts This: Topic  Forum		H0w is your flying with in with the wally motor in it?Is it worth all the trouble i thinkn you you should just get a proven hanson motor. Just my thoughts.


Thanks

Spectra G 26cc
Jewel
2 Evo 50's
3 Trex 450's
Trex 700
Raptor50
12Z
11-03-2009 12:33 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
TaleGunner
Elite Veteran
Location: Deer Park WA

My Posts This: Topic  Forum		I do have a Hanson with a wally fan on it. I ordered lower gearing befor I was called to duty in Alaska and now that I am home want to try it out. I havnt flown in almost 3 months. Raja and others say the lower ratio will be better for higher HS/RPM-torque range for this engine so I thought I would try it. I also bought the new Hatori muffler and will get rid of the V-4. wish I would have waited and read what raja said about the zimmerman side mount as the Hatori seems much heavier than his.

CRASH! GLUE! REPEAT!
11-03-2009 12:40 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
1 page86 viewsPOST REPLY
Midland Helicopters . HeliProz . Ron’s HeliProz South

.
.
Gasser Model RC Helicopters > Spectra g part # needed
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 12:27 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF