FlaG8r
Elite Veteran
Location: Florida
My Posts This: Topic Forum | Let's start by saying you'll be using Lipos...some fly A123, but that's probably not you. Secondly, on the Trex 600 Electric you'll need at the very least 6S. I would tell you to run 8S, but that's just my opinion. I think a good starting pack would be a 6S 5000mah. Ask around on the Trex boards and see what size packs will fit that frame, maybe you can go to a higher Mah.
The debate over lipo brands is going on in many other forums right now, but IMO, you can't beat the Turnigys from Hobby City. If you run 6S 5000, the packs are VERY cheap compared to others. If you're gonna run 8S, get 2 4S 5000 packs and run them in series.
Regarding the chargers you listed below...both of them do up to 1 6S at a time. So, 8S or above is out of the question as well as charging more than 1 6S pack at a time. If you think you'll be into larger electrics you might want to consider purchasing a larger charger.
Life is tough, it's tougher if you're stupid
www.jaxrc.com |
