zsultan
Veteran
Location: USA
My Posts This: Topic Forum | HI guys,
I am using all stock electronics on my 250SE. My tail keeps wagging (continuous wag) i started with 25% on GEAR channel and went down until 11%, it got better from 25% to 11%, but still wags. When i went down to 9% i could feel that the tail is not holding,
BTW, i am using DS420 and Align 760 gyro, smaller tail blades that comes with the kit, stock pinion, 90% throttle on idle1 and 100% on idle 2, align 30C 850mah lipo, +11 and -11 pitch, spektrum AR6100E rx and BEC output set to 6V .
Does AIL, ELE, PIT on swash mix have to be between 40% and 45%, and ball link for tail servo at 4.5mm (inner most hole on the round servo horn (per manual)? I have AIL and ELE on +60% on swah mix and have the ball link in the outer most hole on the round servo horn.
What gain do you guys have on the GEAR channel of your Spektrum radio?
Thanks in advance. |
