biglahou
Senior Heliman
Location: Idaho, the potato land, with better looking women.
My Posts This: Topic Forum | With the help of a good friend I got it figured out, hope I can explain this to help others out
On the RX "AR7100R" there is two throttle plugs, one 5.2 volts, and the other is non regulated, I plugged my switchglo pro into the unregulated plug on RX and no it runs on the throttle, so if I turn on the TX then RX the glow ignites, if the throttle stick is more than 40% it wont ignite when I turn it on, if it is less than 40% it will go on for 12 seconds as that is what I got it set on, if I toggle the throttle up then back down it goes on again.
Now the four switches on the switch glo the little tiny ones the number 3 switch "SR servo reverser" I had to switch that up in order to match out with my throttle, low stick on, over 40% stick off.
If im on idol up 1 or 2 it wont go on, but if Im flying and do an auto and flip my throttle hold it turns on for an auto but for only 12 seconds.
I cant use any other switch to use the switchglo on due to the RX Im using unless someone else knows a way.
thanks marc for the help.
OK,,,SO WHAT, IM ADDICTED, WHATS YOUR POINT? |
