the Wasp
rrProfessor
Location: Vt
My Posts This: Topic Forum | you need to setup your heli and Curves for what's best for you, the way you want it, the way you want it to feel,,
"" I am running a Align gov""
well with a Governor your Head Speed will always remain a what you set the governor at, so you just need to try different Pitch Curves to find what is right for you and where you want your Throttle Stick when hovering and landing,,
as for the Tail I'm not sure what the problem is, but what Tail Blades are you using, with the longer Main Blades and the powerful Hyper 50 try some larger RotorTech Tail Blade, that really make the 401 hold,,
as for Head Speed, that too is a personal preference,, but let me add my friend has been flying FAI/F3C since 1974 and he keeps a lower Head Speed yet he has his Cyclic mechanically fast, on his 50s he uses a Head Speed of 1600 to 1750, again it's personal preference so don't be feeling you have to copy other people's setups,
Pitch,, if you want more pull pop it up to 11 if you want,,
PS,
1) you do know RR has a FAI/F3C page ??, you can get some good tips there,,
2) you may want to think about getting the NX 50 control system, most likely it's a more straight-forward control system that is easier to setup (JMO)..
Jim
Buzz Buzz Buzz |
,, that's great,,
