Dr.Ben
rrProfessor
Location: Richmond, VA, USA
My Posts This: Topic Forum | Guys,
For those of you periodically annoyed like me by the SSZ-IV drag insert's propensity for loosening up on the plastic 2T spacers AND who don't want to upgrade to the SSZ-V inserts and spacers, Loctite 638 is showing early promise for me in fixturing the inserts into the grips and thus preventing turning and loosening. If you try this, either use a bit of loctite primer or set the grips in a 150D or cooler oven overnight to make certain the loctite cures. The shiny metal inserts and anodized grips don't exactly fulfill the need for an "active metal" surface to activate the loctite in the absence of primer or gentle heat.
FWIW,
Ben Minor
Representing
MRC Hirobo Helicopters and Team Futaba for Radios
Morgan Fuels
OS Engines |
