groran
Senior Heliman
Location: Carriere,MS.
My Posts This: Topic Forum | I fought with this thing for 6 hours straight yesterday and could not get the interaction out from a Xcell extreme. I tried all the mixes, plus, minus this way that way, reverse. I have a 9ZWC2, so I'm used to programming these and actually like it, but only when it does it right. I was using a Futaba 7C 2.4 with absolutely no problems, but switched for more model memory and more channels and functions. I called futaba service and he was kinda helpful but only told me everything I tried. Then I tried the 8 channel receiver that came with the radio, I had a 7 ch. in it already, same thing. But when I programmed for the 8ch.(it has 2 modes, 1 for 7ch and 1 for 8ch), it offered me to reset. I did and the interaction was gone. So I put the 7ch back in, no more interaction. I wasn't able to get full pitch w/o all kinds of binding and now, no binding, full pitch. The only thing I can figure is when I reset,the receiver type(it also reset ALL my others setting too) and I turned it off, it perhaps rebooted. Aren't these like some kind of computer programs for rc radios? Anyway I was thinking of sending it back to tower, but it's working. Also make sure that you don't set trims from the digital trims on front, because when you switch to idle up. it doesn't hold the trim for the idleups, adjust trim from subtrim menu. It's different from the C style radios for sure. Thanks for reading a long post but it needs it, see ya. Randy
What goes around comes around Good or bad-Do Good
Randy Lafleur
Futaba 8FG
Xcell Extr |
