12FGHeli
Heliman
Location: Shreve, OH USA
My Posts This: Topic Forum | Mike,
Glad to hear you got the switch set. I did some additional research on deleting flight conditions in the 8FGH, below is what I found.
On page 37 of the Futaba 8FGH manual there is a note in section 3 that states the following:
Note: Since you may accidentally activate a condition not previously setup during flight which could cause a crash, we suggest deleting conditions that are not used. *For a description of the condition deletion, refer to the Condition Select function, p.70.
On page 70 (Condition) there is a note (top left) that reads as follows:
Note: To prevent accidental activation of any unused flight conditions during flight, set the switch setting of those unused conditions to null (--).
Based on the above, you may not be able to delete the unused condition, just inactivate it by setting the switch to (--) null. The note on page 37 may be in error regarding condition deletion.
The only other thing that I can think of (since I don’t have a Futaba 8FGH to test) is to access page 3/3 of the Condition function (using the S1 button) and scroll to highlight IdleUp3 under Source. Then press the RTN button to see if a Delete option is offered.
Mark |
