EvoCopter
Heliman
Location: Singapore
My Posts This: Topic Forum | Hi Poom,
Sawadikap,
There is another simple alternative. Just add a brass thin sheet, bend one end covering the servo and the other fasten over together with servo. This way when inverted, oil will be on the sheet and when you land, it will drip of the sheet. Perhaps the brass sheeting can also work as an added heat sink!
This method or similar have been used by a member of Runryder I believe. If you're going for the shift method of the tail servo, the CF servo holder will have to be custom.
Hope the suggestion helps.
Rgds
K C |
