copperclad
Elite Veteran
Location: NY
My Posts This: Topic Forum | Hi BigC
the mainshaft on all mSRs is at a slight angle , this is normal , and if you look they have the tail motor at a slight angle , this is normal too
i would start with a fresh model memory in your TX , it can be either acro or heli , but make sure it is reset to a blank state , all you might want to change is the name , if you use heli , be sure it is set to 1 servo normal
with the servos you will notice that they are linier and do not have arms , but do check that they both work with the right stick , this will tell you if it is a bad servo
the other thing to check with the servos , is they can have some play in them to the point that the gear on the servo motor does not engage the servos worm , they can just be pressed back together if this is the case
look at the tail motor and the servo gears to be sure there is not lint or hair caught in them
you want the swash level from both side and front , center the trims and adjust the links for this
be sure the swash has not popped apart
the flybar should not bind in any way , you will probably see it has some play this is OK
keep us posted 
. |
