RunRyder RC Helicopter Topic - swift620se

RR Rated M For Mature

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 390 ONLINE 18 EVENTS SEARCH REGISTER START HERE

2 pages [ << < 1 ( 2 ) > >> ]

438 views

POST REPLY

Autography FlightPower	.	Advantage Hobby	.	Revolution Models
	.		.

e-Century Hummingbird - Swift > swift620se

blueghost
New Heliman
Location: hudson fl usa

My Posts This: Topic Forum

i called heli world in ca but he wasnt much help i have tried just about everything the only thing i am not sure of is yhe main frame i dont know if the mounting holes for the tail transmission are the same on a 550 and 620se possible i have a550 frame i need a mearsument from the bottom of the frame to the bolt hole for the transmission case

11-05-2009 07:28 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

MotorRotor
Heliman
Location: Eastern Canada

My Posts This: Topic Forum

Seems like you have similar experiences relative to technical help with Heli-World as I have had.

Try e-mailing or PM'ing Oldfart here on RR. He has always come through for me.

11-05-2009 11:15 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE

HarveyR
Heliman
Location: France - North

My Posts This: Topic Forum

I've checked my 620SE against your picture and my impression is that your problem is that the "lower main gear" is too high.

I think your "transmission gear" is right, it's the main gear that seem too high.

Normally, there's room for a third gear between the "top main gear" and the "bottom main gear", you can see this on p12. Looking at your picture I don't think there's room.

As Eddie.M suggests, are you sure you've got the "driven tail hub" on the top, like on p12 ?

11-06-2009 09:09 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE

blueghost
New Heliman
Location: hudson fl usa

My Posts This: Topic Forum

thanks for your reply i have checked and double check all gears i know the main gear needs to come down but the hub is sitting on the third bearing block also i have the main gear spacer in place

11-09-2009 01:19 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

oldfart
Elite Veteran
Location: Vancouver, Canada

My Posts This: Topic Forum

OK, OK MotorRotor, as there seems to be a lot of Canadians here in this thread, I will help him, I was just giving someone from Heli-World time to do so first

Quote
....i have checked and double check all gears i know the main gear needs to come down but the hub is sitting on the third bearing block also i have the main gear spacer in place

There lies your problem. Please check your assembly instructions again, you will find your main drive gear, with its' auto hub should be on top. So the hub will be situated just below the middle bearing block, not the third (bottom) bearing block.

Below that you will have the driven tail pulley drive gear and there will be a collar between it and the third bearing at the bottom.

11-09-2009 02:11 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE

blueghost
New Heliman
Location: hudson fl usa

My Posts This: Topic Forum

thanks for the reply the upper main gear with the auto rotation hub on top mounts in the second bearing block then the spacer then the second main gear with tail drive hub on the bottom is this correct?

11-09-2009 04:51 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

blueghost
New Heliman
Location: hudson fl usa

My Posts This: Topic Forum

could you measure from the bottom of the frame to the bolt hole for the transmission case i want to make sure it hasnt been stamped out wrong thank you

11-09-2009 01:45 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

HarveyR
Heliman
Location: France - North

My Posts This: Topic Forum

Any chance you can get some pics of your main bottom gear, from above and below, so we can check if we can see anything strange ?

11-09-2009 08:57 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE

blueghost
New Heliman
Location: hudson fl usa

My Posts This: Topic Forum

i feel pretty stupid now,after all this worry and taking apart and putting together i found i had the tail drive hub mounted wrong now everything aligns up i sure do appreciate your help

11-09-2009 09:05 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

oldfart
Elite Veteran
Location: Vancouver, Canada

My Posts This: Topic Forum

Glad we could help.

Don't worry about it too much. I am sure most of us have had similar experiences.

11-09-2009 10:29 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE

blueghost
New Heliman
Location: hudson fl usa

My Posts This: Topic Forum

could you give me the length of the main shaft on a 620se thanks

11-22-2009 07:08 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

2 pages [ << < 1 ( 2 ) > >> ]

438 views

POST REPLY

CarbonXtreme	.	Midland Helicopters	.	HeliProz
	.		.

e-Century Hummingbird - Swift > swift620se

Print TOPIC

Advertisers

Subscribe to This Topic