RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 385 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page115 viewsPOST REPLY
Model Rectifier Corp . Scorpion Power System . RCHover

.
.
e-Align T-REX 250-450-500-600 > T-REX 250 JR DS3500G Question
 
 
deanguy
Heliman
Location: Dallas, TX

My Posts This: Topic  Forum		I just bought a 3500G for my T-Rex 250. I'm running the stock Align ESC that came with the kit and the lowest the BEC will go is 5.0 volts.. the servo says 4.8 volt only.. Do I need to buy an additional BEC or will the .2 voltage increase actually damage the servo? For those of you that use this servo what setup do you recommend? Thanks..
10-29-2009 12:36 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
rocco.sj
Senior Heliman
Location: San Jose,CA

My Posts This: Topic  Forum		you're fine with that setup.got the same tail servo(3500G) and i'm running at 6v.stock esc.no need to run a regulator.run it straight from your receiver.

Team RF Frequency.
10-29-2009 02:33 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
ken22golf
Senior Heliman
Location: Bridge City, TX

My Posts This: Topic  Forum		Yes, you're fine at 5V. I run mine at 5.2V regulated with a 6V BEC and a step-down.
10-29-2009 09:10 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
fflier9
Senior Heliman
Location: Wauwatosa, WI USA

My Posts This: Topic  Forum		that's a good way to burn it out.
10-30-2009 12:10 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page115 viewsPOST REPLY
HeliDirect . ReadyHeli . Power Helis

.
.
e-Align T-REX 250-450-500-600 > T-REX 250 JR DS3500G Question
 Print TOPIC Advertisers 

Subscribe to This Topic

Tuesday, November 24 - 8:09 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF