RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 647 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page258 viewsPOST REPLY
Power Helis . CANOMOD . Experience RC

.
.
Synergy R/C Synergy N9 > Align 4mm Paddles + HyperfromanceRC FlyBar
 
 
bkervaski
Key Veteran
Location: Birmingham, AL, USA

My Posts This: Topic  Forum		I hate putting an Align product on my Synergy, like putting cheap tires on a Corvette, but these paddles are soooooooo much better than anything I've flown.

I tried the 700 FlyBar too, it was way to fast and just seemed like it would bend a lot, didn't like and didn't trust it.

The HyperformanceRC length is "just right" and it's still a rocket and really stable in FFF.

The two sets of Align paddles I bought both had defects and pain runs, lol, cheap sh*t, but they freakin work great!!!

I wish Curtis would do a paddle with this airfoil and weight.

FYIIAC
10-27-2009 04:07 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Entityofme1
Senior Heliman
Location: Birmingham, AL.

My Posts This: Topic  Forum		Out of curiosity did you think all this time I had this same setup on mine because it flew horrible and thats what I like?
10-27-2009 05:00 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
bkervaski
Key Veteran
Location: Birmingham, AL, USA

My Posts This: Topic  Forum		LOL f*cker.

Man, I just needed to hear it from more than one guy, you know me, hard headed, stubborn, set in my ways, etc.



Oh, YOU WERE RIGHT, there, I said it, publicly, I can admit when I am wrong.

You were also right about the Arizona reg and ATGv3 (vs my Duralite reg and GV-1).
10-27-2009 05:04 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
N9flyer
Heliman
Location: USA

My Posts This: Topic  Forum		I have been stuck on the 5mm flybar too. But after reading your posts and seeing what Matt is flying I just ordered the Tube, Align paddles, and the botos mixers. Hopefully, I have the same eye-opening experience as you.

What hole are you running on the flybar?
10-27-2009 07:15 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
bkervaski
Key Veteran
Location: Birmingham, AL, USA

My Posts This: Topic  Forum		Definitely ditch the 5mm flybar for 3D.

I'm not running the new mixers, stock mixers, middle hole.

Joe runs all three holes, he has a system, I'm sure when he reads this he'll post about it.
10-27-2009 07:29 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Entityofme1
Senior Heliman
Location: Birmingham, AL.

My Posts This: Topic  Forum		Just because you crash and strip out a linkage arm from the carrier doesn't mean that there are two other mixes that cannot be used as well. Definately ditch the 5mm flybar and use the align paddles with the hyperbar. The N9 flies great on all three mixes and I highly recommend trying all three if you own an N9 to see what you like the most. Believe it or not mine is still pretty fast on the outer hole and side to side tic tocs can still be done quickly they just require more effort. It will still 3D just fine but you can have a bit more stability or less stability depending on how fast you want the cyclic to be. I have the aftermarket mixers as well but have yet to put them on. I am betting that while using them on the outer hole you would probably end up with a cyclic speed somewhere between the inner and middle hole.
10-27-2009 09:16 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
bkervaski
Key Veteran
Location: Birmingham, AL, USA

My Posts This: Topic  Forum		Whenever Entityofme1 crashes he just moves to another hole on the seesaw instead of buying a new one. The guy really knows how to stretch his crash budget, lol.

But hey, I can't say anything, he can fly circles around me.
10-27-2009 09:27 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
baddynergy
Elite Veteran
Location: valencia, ca- usa

My Posts This: Topic  Forum		Now you need to try that set up with the Botos mixers. I thought my FBL set up was quick, but this setup is even quicker..

**Unattended children will be givin a shot of espresso and a puppy**
10-28-2009 03:04 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
oysifly
Veteran
Location: Bentonville, AR

My Posts This: Topic  Forum		Where can I get a 'Sleeve and 4mm fly bar'??? I already have a set of align paddles, I'd like to try this as well............

Quick...here comes my wife....hide that new Heli !!!!
10-28-2009 03:21 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Helico-pteron
Senior Heliman
Location: Northeast Illinois

My Posts This: Topic  Forum		All the guys seem to be running those here, I prefer the Stubz. Having one Align part is enough for me, I don't need three.

I like it wicked fast, so I have 160g Red Devils on it too.

P.S. The Hyper bar actually slows it down.

Synergy HZ | Synergy SR
10-28-2009 03:23 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Entityofme1
Senior Heliman
Location: Birmingham, AL.

My Posts This: Topic  Forum		I tried the align bar as well and it was just too pitchy while using some SAB 710's. Granted the SAB's were pitchy blades anyway and don't compare to the smoothness and all around flight characteristics of the rotortech's I've been using. Matt uses the regular radix 710's which probably smooth out some of those pitchy tendencies that come with those lighter blades. For me it's all about trying to get a good mix of it all that will make up for my current lack of abilities to make things as easy as possible. It comes down to flying style too and what your preference is. The pro's can still make the super fast cyclic heli's look smooth as FAI but us regular guys are just regular guys and I seem to benefit more by using a combination of mixes and hardware that provides moderate speed and moderate stability.
10-28-2009 02:24 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Helico-pteron
Senior Heliman
Location: Northeast Illinois

My Posts This: Topic  Forum		I prefer to numb the servos around center so that I still get that fast cyclic if I need it.

We all have our preferences.

Synergy HZ | Synergy SR
10-29-2009 12:58 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
1 page258 viewsPOST REPLY
Heli-Max . Hobby Hut . Heli Wholesaler

.
.
Synergy R/C Synergy N9 > Align 4mm Paddles + HyperfromanceRC FlyBar
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 1:39 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF