RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 874 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page228 viewsPOST REPLY
Hobby Hut . Heli Wholesaler . JR-Spektrum

.
.
e-MSH Protos 500 > Some information please.
 
 
Electric Only
Senior Heliman
Location: New Jersey

My Posts This: Topic  Forum		I think I might build up a Protos next month. Few questions I have:

1. will a Jazz 80-6-18 work for ESC; will use Scorpion 880KV motor
2. does it accept 5mm root tail blades
3. can you run a 6S 3200mAh pack
4. can you run DS510s on cyclic and 3500g on tail

I only need one!
10-26-2009 09:55 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
sbmon
Senior Heliman
Location: DEEP IN THE BOG

My Posts This: Topic  Forum		3. That size pack will work for sport flying but is too big for good 3D you would want a smaller size like 6s 2600mah.

4. I ran the 3500g for awhile but it felt very sketchy or heavy pitch change manuvers. I replaced with a JR 8900G and the tail is amazing now.

shawn
10-27-2009 07:41 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Electric Only
Senior Heliman
Location: New Jersey

My Posts This: Topic  Forum		sbmon

I did not realize you could run a full size servo. If I go with the 6S 2600mAh packs will it still balance out with a full size tail servo? Also I was thinking of going with a Spartan DS760 or a Mini G for gyro but not sure what most are running with great success.

Thanks

I only need one!
10-27-2009 09:57 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
twinpeak
Senior Heliman
Location: Prague, Czech Republic

My Posts This: Topic  Forum		to answer your questions:
1. Yes the Jazz works flawlesly
2. I have to measure, I know the 72mm Radix and the 75 mm Fun Key tailblades fit for sure
3. I doubt a 6S 3200 would fit under the canopy and too heavy, so
either 6S 2600 or 5S up to 3600
4. I agree with Shawn, the full size are always far ahead on the tail,
BLS 251 = first choice if your gyro supports 760 ms pulse width.
David
10-27-2009 11:48 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
sbmon
Senior Heliman
Location: DEEP IN THE BOG

My Posts This: Topic  Forum		The protos has alot of room on the battery tray for different battery placements. With a 6s 2600mah (hyperion vx cells are what I use currently) and the full size 8900G tail servo it is very easy to get a perfect CG and still have room to spare even with the canopy on. I actually can still get cg with this same setup on a 6s 2200mah battery.

As far as gyro choices I have not used a mini G but have read on the forums that they work well but can be finicky to setup. I have spartans on all of my machines and have always been very pleased with the performance and ease of setup.

As far as tail blades go the protos grips take a 4 mm root tail blade. The align blades and most all of the carbon fiber tail blades I have seen are 5mm root for this size machine. I tried some kbdd plastic tail blades that come with a 4mm root. Unfortunately the kbdd blades are a bit large for the protos machine and I believe they over load/work the tail system (The protos only has radial bearings in the tail, no thrust bearings.). That being said the ideal tail blades I believe are the MSH 3K tail blades. These tail blades are the same size and shape as the stock tail blades but much much stiffer providing ideal performance.

shawn
10-28-2009 12:51 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
integy2
Heliman
Location: Walnut, California USA

My Posts This: Topic  Forum		On tail
Spartan + BLS251 can not go wrong with this combo.

integy2
10-29-2009 09:03 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
1 page228 viewsPOST REPLY
E-flite . Fast Lad Performance . Ace Hobby

.
.
e-MSH Protos 500 > Some information please.
 Print TOPIC Advertisers 

Subscribe to This Topic

Tuesday, November 24 - 12:47 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF