RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 711 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page213 viewsPOST REPLY
E-flite . Fast Lad Performance . Ace Hobby

.
.
Thunder Tiger Raptors 30-90 - Imperio > RAPTOR 50 Receiver antena AR7000
 
 
morray1
Heliman
Location: Wisconsin

My Posts This: Topic  Forum		Hey guys I think I need a new secondary receiver for the AR7000.
One of the antena wires broke. First the insulation around the wire cracked and then the wire eventually broke.
When I get the new part can I just simply plug it in with the main receiver and fly or do I have to bind the whole thing again?
Thanks guys.
10-26-2009 05:00 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
BEAR
Senior Heliman
Location: Peterborough

My Posts This: Topic  Forum		Dont know about the rebind but if in doubt just do it to be on the safe side it only take a couple of seconds to do. What I have done with my receivers is cut a small peice of fuel tube and pushed it on the little plastic spiggot that the R.X antener wire comes through
10-26-2009 06:30 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
morray1
Heliman
Location: Wisconsin

My Posts This: Topic  Forum		Thanks for the reply Bear. The tubing is a great idea! Do you cut the tubing so it covers the whole antena wire or just part of the wire and plastic nub? The tubing won't interfer with reception?
Thanks again!
10-26-2009 08:40 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
BEAR
Senior Heliman
Location: Peterborough

My Posts This: Topic  Forum		I cut the fuel tube longer than the wire, and as the rx is inside a grp canopy already and i,ve had no problems I cant see a bit of fuel tube causing an issue
10-27-2009 05:51 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Zaneman007
Elite Veteran
Location: Texas - USA

My Posts This: Topic  Forum		Rebind

The Rx's bind independently of one another. You will have to rebind for the new Rx to see your Tx.

Old Guys Rule!
10-27-2009 06:54 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
chopper_crazy
Elite Veteran
Location: Delphos, Ohio

My Posts This: Topic  Forum		whenever you are in doubt. Re-Bind. It won't hurt a thing. Just give you piece of mind.

It's a complex, costly, glow powered anti-gravity machine!
10-28-2009 12:22 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
jschenck
Elite Veteran
Location: La Vista, NE.

My Posts This: Topic  Forum		you will need to rebind, it's a new receiver (the satilite receiver).

I always put some shrink wrap over all the DSM2 antenna bases. If the RX doesn't have the nubs like the AR6100's then I also put a dab of hot glue gun glue around the base.

.. P-gas, T700, V50c/u, R50T, T4/250 and a Cricket ..
10-28-2009 01:59 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
morray1
Heliman
Location: Wisconsin

My Posts This: Topic  Forum		Thanks for all the replies guys! I'm real fussy with my stuff so I still can't believe that little bugger broke off. Anyways, thanks again for the help.
10-28-2009 03:13 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page213 viewsPOST REPLY
Esprit Model . Thunder Power RC . Mikado Modellhubschrauber

.
.
Thunder Tiger Raptors 30-90 - Imperio > RAPTOR 50 Receiver antena AR7000
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 4:29 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF