Wingmanrc39 Senior Heliman Location: Hardinsburg,In. US
My Posts This: Topic Forum My Classified Activity My Classified Feedback Add Classified Feedback | 
1st airframe has metal headblock but needs a main shaft,THUNDER POWER 40ESC WAS NEW TWO HOVERS AGO.. Htx 900 servo's, TELEBEE GYRO, SAB 325's (used)
2nd ARF Airframe with metal swash and lower mixing arms has 3 HXT900 servo's from HC with three hovers on them. Comes with TURNIGY 3700KV motor that the shaft was cut a little short but worked for me on the spool up.. Heli needs to be tracked out to get it to fly. Has new FG blades.
3rd heli: airframe is pretty much for parts. Needs main and blade grips to be flyin, and one side of the battery tray is missing. Swapped it off to another mini.
The 2 lipo's have 4 cycles a piece, 1 Month old too. Two flights on a rex 450 and 2 hovers on the mini. LOTS OF POP!
2 RINO 3s 2150 20c lipo's with a4 cycles a peice bought them a month ago and used them on a Rex 450 a few flights
1 mystery 2200 20c lipo with about 20 cycles on it, Still has pop and a little giggle left
275.00 Shipped and there is no haggle or PP fees.
INcluded is a Align gyro is like the Telebee HL GYRO.. Also included is a A BUDDY GAVE IT TO ME SO I AM THROWING IT IN HERE..
PARTS BIRD OR ELECTRONICS TO MAKE #3 RTF
U WILL NEED ESC AND RX AND TAIL SERVO TO FLY THE #2
U WILL NEED, RX and tail servo,and rx main shaft to FLY #3 I am going 4s and upgrading my one other Mini so these are just for funds.
CAN ADD A TRITON JR AND EQUANOX BALANCER TO THIS FOR AN ADDITIONAL $55.00
PAYPAL ONLY
NOW ONLY 258 PP fees included
Keep your back 2 the Sun and GET-R-DONE! |