RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 862 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page369 viewsPOST REPLY
Ace Hobby . Esprit Model . Thunder Power RC

.
.
Vario Sky Fox - Benzin - Evolution - Xtreme > Vario on board starter
 
 
MattHarper
Senior Heliman
Location: Lancashire, UK

My Posts This: Topic  Forum		Does anyone know if the onboard starte will fit in the Benzin Trainer or is it only for use when the mechanics are installed in a scale fuselage ?
10-21-2009 01:09 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
dazzaster
Key Veteran
Location: right next door to hell

My Posts This: Topic  Forum		ive just installed one on a trainer however its very close to the servo rods which was resolved by bending them up slightly in the middle to bridge over the motor.
this was just to set up the model i have now got the airstar int frames which allow the servo to be installed on the side frames which work better and allow me to get a more scale apearance in the bell47 and at the same time keep the eletric start

A.K.A 509
10-21-2009 04:00 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
MattHarper
Senior Heliman
Location: Lancashire, UK

My Posts This: Topic  Forum		Thanks dazzaster, for the clarification. Flicking through the catalogue this morning it dawned on me that it probably wouldn't fit easily, if at all. I thought I'd ask the question before buying.
10-21-2009 09:17 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Wemo
Senior Heliman
Location: Hootie and Blowfish Country- USA

My Posts This: Topic  Forum		It fit in mine very well. My pics in my Vario gallery section proves it worked and still works nicely, even in my huey. I would recommend to use a Brushless system.


"How high do they go? Are those things hard too fly? How much do they cost?"
10-21-2009 11:39 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
dazzaster
Key Veteran
Location: right next door to hell

My Posts This: Topic  Forum		also to add i use a 3 cell 350mah evo lipo pack to run it as it gives a better start compared to nimh that vario recomend. however be carefull to ensure you give it short burst when starting

A.K.A 509
10-22-2009 02:30 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Wemo
Senior Heliman
Location: Hootie and Blowfish Country- USA

My Posts This: Topic  Forum		Yes...I would concur..I have 14.8V on 1600Mah for mine with my Brushless with only 60% power. DO NOT do 100%. good luck.


"How high do they go? Are those things hard too fly? How much do they cost?"
10-22-2009 11:17 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
HELIPIL0T
New Heliman
Location: UK

My Posts This: Topic  Forum		The electric start fits okay in the Benzin trainer have had one fitted for two years prior to selling the model not long ago. The only comment i can make is to ensure the main bearing is kept well lubricated other than that 100% reliable.
10-24-2009 02:28 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
1 page369 viewsPOST REPLY
Mikado Modellhubschrauber . Futaba-RC . Boca Bearings

.
.
Vario Sky Fox - Benzin - Evolution - Xtreme > Vario on board starter
 
 
Grocer
Heliman
Location: Richmond,Maine

My Posts This: Topic  Forum		what brushless motor do you use on your onboard starter?
Thanks,
Harry
10-24-2009 06:48 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page369 viewsPOST REPLY
Ace Hobby . Esprit Model . Thunder Power RC

.
.
Vario Sky Fox - Benzin - Evolution - Xtreme > Vario on board starter
 Print TOPIC Advertisers 

Subscribe to This Topic

Tuesday, November 24 - 12:29 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF