RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 871 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page728 viewsPOST REPLY
Ron’s HeliProz South . MTA Hobbies . Model Rectifier Corp

.
.
Main Discussion > Futaba digital cyclic servos
 
 
Dirty
Senior Heliman
Location: Des Moines, Iowa, USA

My Posts This: Topic  Forum		Which of these three Futaba digital servos in your opinion is best suited for CYCLIC controls for all around flying including 3D.?
03-02-2002 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Taipan
Elite Veteran
Location: Sydney, Australia

My Posts This: Topic  Forum		I've the 9151s. Was supposed to get 9252s, oh well. The 9151s hold their centre/position better than the 9252s. They should be fine for the meantime.

Edit: Do any of you reckon the 9151s are too slow? Yet they're slightly faster than the 9202s (0.22sec) - very common cyclic servos. Todd uses them.

You probably would have to be CY to utilise the speed of the 9252s!
03-02-2002 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
langen
Senior Heliman
Location: Stockholm, Sweden

My Posts This: Topic  Forum		speed of the servo

One question to all,

how many times per flight do you quickly "bang" the stick to the max so you would notice the difference in speed?

I know I dont.. quite franckly I dont think I would notice any difference betwen a .13 servo and a .22 (except on the tailrotor).
03-02-2002 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Dirty
Senior Heliman
Location: Des Moines, Iowa, USA

My Posts This: Topic  Forum		updating so people will post there opinion on this topic
03-05-2002 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
vetrider
Elite Veteran
Location: Daleville, AL (Ft.Rucker)

My Posts This: Topic  Forum		If your worried about getting the best Digital servos check out some Hitec servos that have much more preformance for a lot less $$$.
Just my honest opinion.


Nolan
KBDD, Magnum Fuel
Stratus, 700E, K3D, Vibe, Protos.
03-05-2002 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Dirty
Senior Heliman
Location: Des Moines, Iowa, USA

My Posts This: Topic  Forum		Hitec digital

Vetrider,

That depends on where you buy them from. Hitec digitals from Servocity.com are about $88, but you could go to Cyberheli or Helihut and pick up the 9151 or 9252 for about $90.

I do like the Hitec digitals and I am using a Hitec 5945 (153 oz, 0.16sec) digital on my collective, but the gear tolerance is a little loose for my likings. I am considering other Hitec digitals for my cyclics, but I just wanted to see what futaba digitals people are using on thier cyclics.

Thanks
Darren
03-05-2002 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
1 page728 viewsPOST REPLY
ReadyHeli . Power Helis . CANOMOD

.
.
Main Discussion > Futaba digital cyclic servos
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 11:12 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF