RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 879 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page162 viewsPOST REPLY
CarbonXtreme . Midland Helicopters . HeliProz

.
.
e-E-Flite Blade MSR CP CX MCX 400-3D > Blade CP++ cp pro 2 flybar question
 
 
rdr4evr69
Senior Heliman
Location: Iowa

My Posts This: Topic  Forum		I just got a blde cp pro 2 and my question is that the flybar does not float freely, has a little drag to it... not tight but if i move it it stops as soon as i quit moving it... is this normal?

My tail fin also fibrates a good amount

It is new only flown 2 times....

On my t-rex it is very free....

Thanks much for any help
Rdr...

T-Rex 450 Sport W/DX7
Blade Cp Pro 2
FunJet
Slow Stick
AMA#887873
10-16-2009 03:20 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
itsjojo
Veteran
Location: North East Pennnsylvania

My Posts This: Topic  Forum		My Cp Pro does have some drag on the flybar. More drag than my 450. It doesn't seem to stick. Definitely does not float freely like the 450. I think you'll be ok though. I noticed that the plastic head parts on the cp pro do have some friction in them from time to time.
The tail fin vibs I get too. I run bearings for dampeners and this does throw some vibes through the airframe. My skids do vibrate to a blur as well.
jojo

Trex 500esp 600N Pro & 700 Nitro Dx7
10-17-2009 12:24 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
rdr4evr69
Senior Heliman
Location: Iowa

My Posts This: Topic  Forum		sounds good Jojo... was just making sure it was OK....
I just dont remember my old one doing it...
must be fine!!

T-Rex 450 Sport W/DX7
Blade Cp Pro 2
FunJet
Slow Stick
AMA#887873
10-17-2009 01:48 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
piranhafreak
Senior Heliman
Location: new jersey

My Posts This: Topic  Forum		mine is pretty free being the blade cp is cheap plastic all around im sure it can vary but i just hooked up mine to my dx7 got everything trimmed out and fly great for what it is if there is slight drag i would imagine it will still fly fine just mabey a little slower on the cyclic

Mabey one day i will actually land one of these things !!
10-22-2009 02:01 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Mitchilito
Senior Heliman
Location: Morehead City, NC USA

My Posts This: Topic  Forum		What a drag

It's probably a result of those crummy plastic balls.

Love my CP, hate the balls.

perfection is the death of creation
10-23-2009 07:26 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
rdr4evr69
Senior Heliman
Location: Iowa

My Posts This: Topic  Forum		Ya, now that I gotta good crash under my belt on it, and rebuilt it myself, it actually flys better...go figure... quality control is not perfect on these... my first pro 2 was nicer flying than this one....

I had a pretty good vibration on this one from day one... well on my crash I took out the shaft on the rear motor.. when taking the rear apart I found the prop adaptor was kinda fudged up at the factory... put a whole new rear end on it, and the vibe is gone...
crazy stuff.....

Thanks for all the help guys, and gals...

T-Rex 450 Sport W/DX7
Blade Cp Pro 2
FunJet
Slow Stick
AMA#887873
10-23-2009 07:38 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page162 viewsPOST REPLY
Ron’s HeliProz South . MTA Hobbies . Model Rectifier Corp

.
.
e-E-Flite Blade MSR CP CX MCX 400-3D > Blade CP++ cp pro 2 flybar question
 Print TOPIC Advertisers 

Subscribe to This Topic

Tuesday, November 24 - 12:32 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF