TrexBelt
New Heliman
Location: NC
My Posts This: Topic Forum | Been dealing with "glitches" while using a DX6i in Phoenix 2.5R and now have a solution for all that have this problem. This is a copy of the email Phoenix sent me this morning and I tested today with great success!
Hi Doug
We have now spent a great deal of time on this issue, which appears to be with the radio’s training port, and not with the radio itself or the Phoenix hardware or software.
We have added a new filtering system, and updated the 2.5.r version for the small number of users who are experiencing the problem.
Please can you reinstall the 2.5.r update freshly by doing the following:
Download the 2.5.r update from our Downloads page: www.phoenix-sim.com/downloads_manual.htm to your my documents/PhoenixRC/downloaded updates folder.
After the file has downloaded to the required folder, please open your Start Menu > Programs > PhoenixRC folder, and run the shortcut “Install Updates Manually”
The 2.5.r update will install, and Phoenix will restart
If you now open the system > your controls > edit menu, you will see a new checkbox in the bottom-left of the menu called “Filter Channels”. Please make sure that this is enabled on the profile you use with your DX6i.
Best Regards
Phoenix Support
NOTE: You DO NOT have to roll back your updates or any other procedure. Just do as the email says and you will be flying "glitch-free" in minutes.
Hope this helps!
Doug |
