Chuckie
Key Veteran
Location: Crofton Maryland, MHA member
My Posts This: Topic Forum | | Quote |
| Anyone successfully setup a N9 with the Bonta head and v4 software? This will be the first time I've done a v4 setup and not used one of the preloaded config files.
|
If you run the stock bell cranks and have the balls on the servo arms at 10mm you probably need to run 70 or so Cyclic Gain (setup menu) versus 100. Mikado has a Cyclic Gain calculator on their web site at http://vstabi.de/wiki/index.php?title=Basic_geometry
Also, I would start with the Logo 600 preset and adjust the settings to match your N9. I friend converted his Fury Tempest and the heli flew wrong. It seems without loading a preset some hidden values are not set making the heli behave oddly. Ed's Fury would pitch up elevator when adding collective and pitch down when moving down on collective. The heli didn't track well when flying at high speed. The fix was to start with the logo 600 preset.
Finally, I've been messing with gyro tape and as thenewguy pics show the vbar works best when you use the metal plate. The vibrations from the motor are blocked and the heli hovers and flys much better with the metal plate and two pieces of medium size gyro tape.
Regards
Charles
Please stand by for faster service! |
