RunRyder RC Helicopter Topic - century hawk tail - help

RR Rated M For Mature

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 721 ONLINE 18 EVENTS SEARCH REGISTER START HERE

1 page

174 views

POST REPLY

Futaba-RC	.	Boca Bearings	.	XHELI.COM
	.		.

Century Hawk - 50NX - Raven - Predator > century hawk tail - help

rexingtheair
New Heliman
Location: A.C.T. Aust

My Posts This: Topic Forum

hi guys,
hoping someone can help me out with some details regarding the hawk torque tube tail unit. ive been told that this might be what i need to use for my scale project, i cant find any dimentions and century havent bother to answer my email.

what is the diameter of the tail boom that it fits to, is it 22mm?
also are both the tail input shaft and output shaft 5mm diameter?

the tail case part# is HI 3078

thanks for any help

10-11-2009 01:06 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

Dilbeck
Key Veteran
Location: Springdale Arkansas

My Posts This: Topic Forum

Your question is somewhat confusing, but the tube is 19mm OSD. the shaft itself is 7mm. The dogbone T is 12mm.

If it doesn't fly sell it!

10-12-2009 03:40 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

the Wasp
rrProfessor
Location: Vt

My Posts This: Topic Forum

""are both the tail input shaft and output shaft 5mm diameter""

yes they each have a 5mm diameter,,

anytime you need to know a shaft size just go look at the 30/50 Manuals at Century's site and read the bearing sizes

,, or ask here

Jim
Buzz Buzz Buzz

10-13-2009 12:49 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

rexingtheair
New Heliman
Location: A.C.T. Aust

My Posts This: Topic Forum

thanks guys, thats the info i need, except for one more thing, ive just tryed looking up the bearings i need for the tail case (input and output shafts)and can only find the ones for the output shaft (#CNB1350), are these the same ones for the iput shaft or are they different? if different, can you possibly tell me the part number for the other ones
im under the impression that the tail case part
HI 3078) doesnt come with bearings
thanks again guys

10-13-2009 02:47 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

the Wasp
rrProfessor
Location: Vt

My Posts This: Topic Forum

EDITED

you are missing one B,,

the number you want is "CNBB1350" Tail Case Input Shaft (5 X 13),,

and number "CNBB1150" for the Tail Rotor Output Shaft (5 x 11)

and your are correct, the Tail Case does NOT come with Bearings..

Jim
Buzz Buzz Buzz

10-13-2009 11:01 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

rexingtheair
New Heliman
Location: A.C.T. Aust

My Posts This: Topic Forum

excellent, thanks jim

10-15-2009 01:30 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

1 page

174 views

POST REPLY