RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 840 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page422 viewsPOST REPLY
MTA Hobbies . Model Rectifier Corp . Scorpion Power System

.
.
e-E-Flite Blade MSR CP CX MCX 400-3D > Blade MCX possible carrying case.
 
 
misfits0311
Senior Heliman
Location: Valencia, CA - USA

My Posts This: Topic  Forum		My father-in-law and I are getting my oldest his 1st heli. We decided to get a Blade mCX. Has anyone ever used a Trex 250 carrying case (the one w/ the window) with an mCX? I don't want my little one to use my X9303, so I am getting the RTF version. My concern is if the Tx will fit in the case with the heli. Has anyone ever tried this before? If not, can someone give me the measurement the dimensions for the Eflite RTF radio that comes with the mCX? Thanks in advance. C.J.



Τ®ΞΧ 5°° Ξ$Ρ and now the Τ®ΞΧ 7°° ⱠΞ
10-07-2009 09:34 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
rdr4evr69
Senior Heliman
Location: Iowa

My Posts This: Topic  Forum		Im not sure how the mcx would fit in there, its so small you could prolly put 4 in the trex 250 case....the radio is small also, you could do a custom foam in there and cut it however you like it, and you could make places in there for .... Ummm... about 300 Lipos for the mxc.... IT is WAY smaller than the 250...

T-Rex 450 Sport W/DX7
Blade Cp Pro 2
FunJet
Slow Stick
AMA#887873
10-09-2009 12:25 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
misfits0311
Senior Heliman
Location: Valencia, CA - USA

My Posts This: Topic  Forum		I was just worried about fitting the radio in there. Anyone else?

Τ®ΞΧ 5°° Ξ$Ρ and now the Τ®ΞΧ 7°° ⱠΞ
10-09-2009 01:40 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
rdr4evr69
Senior Heliman
Location: Iowa

My Posts This: Topic  Forum		the radio is small too, it will all fit in there fine for sure with plenty of room to spare

T-Rex 450 Sport W/DX7
Blade Cp Pro 2
FunJet
Slow Stick
AMA#887873
10-09-2009 02:06 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
jkrause528
Heliman
Location: Harrison Twp. MI USA

My Posts This: Topic  Forum		Harbor Freight has some decent aluminum clad boxes for under $30.00.
I use one to carry my Dx7 and I'm sure the MsR would fit with the transmitter.

I fly, therefore I crash.
10-10-2009 11:45 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
TachyonDriver
Key Veteran
Location: Chipping, Lancs, UK

My Posts This: Topic  Forum		I must ask what may seem like a dumb question...

Have you not just considered using the original mCX box? It does have a carrying handle and there's slots for additional heli batteries (5 I think!) not to mention slots for the AA batteries.

Tach.

Little Spinning Bundle of Joy® DON'T DISS THE DINO!!
10-11-2009 03:34 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
misfits0311
Senior Heliman
Location: Valencia, CA - USA

My Posts This: Topic  Forum		Its for the kiddo, so I wanted a neat little case for it. But, yes I considered the original box.

Τ®ΞΧ 5°° Ξ$Ρ and now the Τ®ΞΧ 7°° ⱠΞ
10-11-2009 11:59 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
gordo high
Senior Heliman
Location: down yonder in the south

My Posts This: Topic  Forum		Lowes sells a case with the pluck out foam that will be big enough. If you are careful with a knife or razor blade you could cut it out pretty close so everything has a custom fit. You will also have room for the transmitter and many batteries and probably the charger too. The heli is so small it will only use about 1/8 of the box, (the blades fold up).

Honey, I just need this one more thing and then I'm set..
10-21-2009 01:58 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
1 page422 viewsPOST REPLY
RCHover . HeliDirect . ReadyHeli

.
.
e-E-Flite Blade MSR CP CX MCX 400-3D > Blade MCX possible carrying case.
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 2:32 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF