RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 491 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
3 pages [ <<    <     1      2     ( 3 )    >    >> ]947 viewsPOST REPLY
JR-Spektrum . E-flite . Fast Lad Performance

.
.
Gasser Model RC Helicopters > Finally maidened my gasser
 
 
rbort
Elite Veteran
Location: Franklin, MA - U.S.A.

My Posts This: Topic  Forum		Yup!

As soon as you un-inhibit the point, it will come up exactly half between the two points surrounding it.

By default the INHs are 25 and 75, but that is because the lower one is surrounded by 0 and 50 and the upper one by 50 and 100.

-=>Raja.

1005 Gasser, G26 3DMax++, 2205+ flights
Spectra-g, G26 3DMax, 870+ flights
10-13-2009 06:21 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
xcellgasman101
Elite Veteran
Location: WOODWARD, OKLA....

My Posts This: Topic  Forum
Quote 
As soon as you un-inhibit the point, it will come up exactly half between the two points surrounding it.

Ok that's what I'm saying,, If you don't uninhibit the point,(or change the number at that point) won't it stay at it's pre determend point?? that's why I was quiz'en him about INH, in his post, if you don't (un-inhibit) or give it a number it will stay at what ever it was?? Correct??? by that I mean you have to adjust the point to take it out of INH,, Or that's how mine works?? I think?? I'll add a heli in my radio and play with this to see what happens,, JR 9303 FM radio,, XGM/VGM

John Crotts
www.soonerhelicamproductions.com
10-13-2009 06:35 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
rbort
Elite Veteran
Location: Franklin, MA - U.S.A.

My Posts This: Topic  Forum		Its exactly the opposite of what you're saying

If its INH and you adjust the middle point (50) lower, then the INH (25) point will automatically lower too and when you go to un-inhibit the 2nd point (25) you'll find out that it centered itself between the 50 that you adjusted down and the 0 at the first point. So if you lowered the 50 to 40, then the INH lowered itself from 25 to 20.

If you Uninhibit it, then it will STAY and you can change the 40 back up to 50 but the 2nd point will stay at 20.

Try it. If I may add, INH means that point doesn't exist and your curve will follow the other points and get plotted accordingly.

-=>Raja.

1005 Gasser, G26 3DMax++, 2205+ flights
Spectra-g, G26 3DMax, 870+ flights
10-13-2009 06:42 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
pcinc
Senior Heliman
Location: Westfield, MA

My Posts This: Topic  Forum		Raja,
That's exactly what I found just messing around with my radio. I was watching the T-curve screen and had the 2 points inhibited and played with only point #2, 5, and 6. What i saw was the curve acted like the inhibited points were not there at all and just jumped over them. It just made 2 less points while I was dialing in my T-curve.

Peter
10-13-2009 07:35 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
3 pages [ <<    <     1      2     ( 3 )    >    >> ]947 viewsPOST REPLY
Ace Hobby . Esprit Model . Thunder Power RC

.
.
Gasser Model RC Helicopters > Finally maidened my gasser
 Print TOPIC Advertisers 

Subscribe to This Topic

Tuesday, November 24 - 6:17 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF