RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 718 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
2 pages [ <<    <    ( 1 )     2     NEXT    >> ]1187 viewsPOST REPLY
Advantage Hobby . Revolution Models . CarbonXtreme

.
.
Synergy R/C Synergy N9 > faster
 
 
STUPINEER
Senior Heliman
Location: allen tx

My Posts This: Topic  Forum		I know you guys have been talking about a 4mm flybar. Is it really faster? What do I need to chang besides the fly bar? I want it faster.

ys 91sr
8717 w/AR 7100R
hyper tube

gravity is king
10-06-2009 03:54 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Anthony.L
Key Veteran
Location: Seattle, WA

My Posts This: Topic  Forum		Try the Hyperformance 4mm flybar conversion kit. Basically it's just a 5mm to 4mm conversion tube and 4mm flybar.
10-06-2009 03:59 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Surfer Dude
Heliman
Location: Chicago, Il

My Posts This: Topic  Forum		get the conversion kit with the 700 flybar and flybar paddles

Synergy N9, YS91, SR Hatori Sb19, JR, Radix 710 SB's,
10-06-2009 04:04 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
STUPINEER
Senior Heliman
Location: allen tx

My Posts This: Topic  Forum		what is the best paddles

gravity is king
10-06-2009 04:36 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Surfer Dude
Heliman
Location: Chicago, Il

My Posts This: Topic  Forum		I like the align paddles but i'm sure others have their own preference its all what feels good to you.

Synergy N9, YS91, SR Hatori Sb19, JR, Radix 710 SB's,
10-06-2009 05:31 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
inkspot1967
rrProfessor
Location: cranston ri.

My Posts This: Topic  Forum		get the hyperbar conversion with align flybar and align paddles with the new mixers from fbh and hold onto your panties........lol

Crashing hitting the ground is easy...Hitting the windsock takes skill..!
FBH Synergy N9
Rave
10-06-2009 03:26 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
STUPINEER
Senior Heliman
Location: allen tx

My Posts This: Topic  Forum		what is the hyperbar conversion ? ithought i could use brass tube.
where can i get the mixers?

gravity is king
10-06-2009 04:14 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Helico-pteron
Senior Heliman
Location: Northeast Illinois

My Posts This: Topic  Forum
Quote 
I know you guys have been talking about a 4mm flybar. Is it really faster? What do I need to change besides the fly bar? I want it faster.

Hyperbar conversion
T700 Flybar
4mm Stubz
710mm SAB Red Devils

falls into the uncontrollably fast category

Synergy HZ | Synergy SR
10-06-2009 10:20 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
cation3
Senior Heliman
Location: Smyrna, GA - USA

My Posts This: Topic  Forum		I like the Hyperformance stuff, but... save the $27 on the HyperBar. My guess, most of those reading this have purchased a 90-size set of Radix blades. They come with the washers that the N9 needs to make the blade fit in the grip, but also a 5mm to 4mm bolt diameter reducer / spacer. These spacers, a T-Rex 700 flybar and your choice of paddles are all you need to make your own.

After I read "mlevings" response on this thread, http://www.runryder.com/helicopter/t541261p1/, I made my own.

Drill a hole in the spacer to allow the set screw to bite on the flybar. Short work and a bunch cheaper.



-Drew

ps: For those wondering, the flat spots on the T-Rex flybar match up perfectly on the N9.

10-07-2009 01:30 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Helico-pteron
Senior Heliman
Location: Northeast Illinois

My Posts This: Topic  Forum		Great idea, but the tube serves a purpose. It supports the entire rod thought the seesaw.

Soon we'll be hearing about how your flybar broke in flight.

Don't take my word for it, bend a paper clip back and fourth a few times and watch it break. Maybe an extreme example, but same process.

Synergy HZ | Synergy SR
10-07-2009 01:54 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
baddynergy
Elite Veteran
Location: valencia, ca- usa

My Posts This: Topic  Forum
Quote 
Great idea, but the tube serves a purpose. It supports the entire rod thought the seesaw.

Soon we'll be hearing about how your flybar broke in flight.

Don't take my word for it, bend a paper clip back and fourth a few times and watch it break. Maybe an extreme example, but same process.

Totally AGREE. It needs the extra support.

Quote 
For those wondering, the flat spots on the T-Rex flybar match up perfectly on the N9.

And since the end of the flats stick out beyond the cage and are unsupported, is the exact place I snapped one..

IMHO the best combo is the hyperbar conversion with the flybar and align paddles with the Botos mixers from Fueled by Hate. It is LIGHTNING fast. I thought my FBL bird had quick response but the flybarred bird is giving it a run for its money.

**Unattended children will be givin a shot of espresso and a puppy**
10-07-2009 02:10 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
cation3
Senior Heliman
Location: Smyrna, GA - USA

My Posts This: Topic  Forum
Quote 
It needs the extra support.

...and that's what I originally thought, but look at my last pic, the 4mm vs 5mm flybars pic. There is a wear spot on the USED 5mm flybar that shows where the seesaw bearing contacted the 5mm flybar. Do you see any contact marks between the bearing marks?

Also, the "flats" ends DO NOT stick out past the flybar cage.

IF it fails, I will update this thread (or forum), until such time....

...and FBH Mixers are in the mail....

-Drew
10-07-2009 04:19 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Anthony.L
Key Veteran
Location: Seattle, WA

My Posts This: Topic  Forum
Quote 
what is the best paddles

Align paddles. Check out Matt Botos N9, it has a T-Rex 700 flybar on it with Align white CF paddles.
10-07-2009 04:43 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Rymps
Veteran
Location: Indianapolis

My Posts This: Topic  Forum
Quote 
Great idea, but the tube serves a purpose. It supports the entire rod thought the seesaw.

I have been wondering about this also. One thought i had is the other 90s do not have this support. If the flybar did it would rub on the inside of the seesaw. But id dose not, that is why it is bearing supported. So dose it need the support?
10-07-2009 03:07 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
inkspot1967
rrProfessor
Location: cranston ri.

My Posts This: Topic  Forum		im sure it helps some how much who really knows , but it cant hurt to have it

Crashing hitting the ground is easy...Hitting the windsock takes skill..!
FBH Synergy N9
Rave
10-07-2009 03:10 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
STUPINEER
Senior Heliman
Location: allen tx

My Posts This: Topic  Forum		ok I did the 4mm 700 Trex flybar and used a brass tube all the way through the cage. I have a little play flybar cage this cant be normal or is it? It flew great but the play is bothersome. I am assuming the Hyperformance has no play.

gravity is king
10-12-2009 03:57 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Rymps
Veteran
Location: Indianapolis

My Posts This: Topic  Forum
Quote 
ok I did the 4mm 700 Trex flybar and used a brass tube all the way through the cage. I have a little play flybar cage this cant be normal or is it? It flew great but the play is bothersome. I am assuming the Hyperformance has no play.

I did the same but used two brass spacers. mone flew great no play. I also put on the Boto mixers. The heli is fast to start and then hits its top speed rool rate. But wow dose it start fast. It is pretty stable also.

I am thinking of moving the to the inside hole on the fly bar mixer. Dose anyone else run 4mm flybar and use the inside hole?
10-12-2009 02:46 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
dreed129
Senior Heliman
Location: Albuquerque, NM

My Posts This: Topic  Forum		Kevin,

Use the inner hole, it flies GREAT !!!

Botos also uses the inner hole.


-- Dave

3D or Bust!!!
10-12-2009 09:16 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
baddynergy
Elite Veteran
Location: valencia, ca- usa

My Posts This: Topic  Forum
Quote 
Use the inner hole, it flies GREAT !!!

It is super fast on the middle hole. If I went to the inner hole I might turn it into a post hole digger by the time my old fingers realize what going on..

**Unattended children will be givin a shot of espresso and a puppy**
10-12-2009 10:36 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
dreed129
Senior Heliman
Location: Albuquerque, NM

My Posts This: Topic  Forum		Another thing,

Make sure you use the short ball with the 1.6 mm spacer.

You will have to "reduce" your cyclic in the radio, and adjust the links for zero pitch at center stick.


-- Dave

3D or Bust!!!
10-13-2009 01:51 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
2 pages [ <<    <    ( 1 )     2     NEXT    >> ]1187 viewsPOST REPLY
Midland Helicopters . HeliProz . Ron’s HeliProz South

.
.
Synergy R/C Synergy N9 > faster
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 4:24 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF