RunRyder RC Helicopter Topic - length of tail blades for 3DNT

RR Rated M For Mature

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 856 ONLINE 18 EVENTS SEARCH REGISTER START HERE

1 page

109 views

POST REPLY

Autography FlightPower	.	Advantage Hobby	.	Revolution Models
	.		.

Henseleit 3DNT - Rocket - 3DMP > length of tail blades for 3DNT

cudaboy_71
Elite Veteran
Location: sacramento, ca, u.s.

My Posts This: Topic Forum

FINALLY got the 3DNT maidened this weekend.

one question: i don't have the stock tail blades that originally came with the kit (NT-0309). but, i assumed them to be standard 90 sized blades and put on the CY 105s.

but, when installed with the NHP razor pro 710s they *WILL* hit. can anyone tell me how long the 0309s are? standard 95s? or am i missing something obvious.

if it ain't broke…break it.

10-06-2009 12:26 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE HOMEPAGE GALLERY

laughingstill
Elite Veteran
Location: Gainesville, Fl, USA

My Posts This: Topic Forum

Carbons on a Henseleit tail are a BIG no no unless you have the proper upgraded tail. I am pretty sure they plastic ones are 95mm......Ron

Esprit Model Flight Team, Logo 600 VBAR Xera 4030, Logo 500 Mini-VBAR Xera 4020, 3DMP-E VBAR soon!

10-06-2009 12:35 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

cudaboy_71
Elite Veteran
Location: sacramento, ca, u.s.

My Posts This: Topic Forum

i read that carbons were a no-no (what exactly happens with CFs?) but, i was just getting 5-6 tanks of breakin on the motor this weekend. lots of hovering and some slow circuits. so, didnt even worry about the overlapping blades.

but, now as i start to lean out the motor and get an idleup profile dialed in it becomes *very* important.

i have a set of 92mm KBB 3D blades that should be fine, no? otherwise all i have here are some 95mm Align batmans. what do you all think?

if it ain't broke…break it.

10-06-2009 12:39 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE HOMEPAGE GALLERY

laughingstill
Elite Veteran
Location: Gainesville, Fl, USA

My Posts This: Topic Forum

The Henseleit tails are very rigid and the CF tails offer no flexibility and some have reported tail grips flying off

I would go with the KBDD definitely.......Ron

Esprit Model Flight Team, Logo 600 VBAR Xera 4030, Logo 500 Mini-VBAR Xera 4020, 3DMP-E VBAR soon!

10-06-2009 12:45 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

cudaboy_71
Elite Veteran
Location: sacramento, ca, u.s.

My Posts This: Topic Forum

thanks.

just found this old post, too with your comments and a quote from Jan himself:

http://www.runryder.com/helicopter/...?top=1254786088

if it ain't broke…break it.

10-06-2009 12:45 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE HOMEPAGE GALLERY

1 page

109 views

POST REPLY

CarbonXtreme	.	Midland Helicopters	.	HeliProz
	.		.

Henseleit 3DNT - Rocket - 3DMP > length of tail blades for 3DNT

Print TOPIC

Advertisers

Subscribe to This Topic