RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 744 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page252 viewsPOST REPLY
CANOMOD . Experience RC . Heli-Max

.
.
Synergy R/C Synergy N9 > Stock tail hub?
 
 
Helico-pteron
Senior Heliman
Location: Northeast Illinois

My Posts This: Topic  Forum		Hey guys, who has been running the stock t/r hub without problems?

I have some stock hubs and don't see any reason not to run them when you add a nut to the grip bolt to make it a bit stronger.

Synergy HZ | Synergy SR
10-05-2009 12:08 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
cdrking
Elite Veteran
Location: Seattle

My Posts This: Topic  Forum		I have been running the stock setup since August 2006. I have several hundred flights on the stock setup. The only thing I do a little different is to change the hub bolt to a better quality bolt and to change the bolt about every 100 flights. I also use a red loctite on the bolts. I use just enough that I can break them loose without heat.

I recently built an N9 for a local guy and he had me use an SE tail hub with the grips. I must say that it is a really nice setup.

Jeff

To hover is divine, the alternative is rather PLANE.
10-05-2009 04:05 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
airboss
Elite Veteran
Location: OC ,california

My Posts This: Topic  Forum		the stock hub is fine and like many others we purchase a good quality screw.

OCRM....flyBlackstarr.org.
10-05-2009 04:46 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
steffgiguere
Elite Veteran
Location: St-Eustache, Quebec, Canada

My Posts This: Topic  Forum		+1 all you really need is better quality screws.

I wish I could fly 24/7
10-05-2009 01:31 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Helico-pteron
Senior Heliman
Location: Northeast Illinois

My Posts This: Topic  Forum		Where can I find these said screws?

Like Dubro cap screws?

Synergy HZ | Synergy SR
10-05-2009 01:39 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
bkervaski
Key Veteran
Location: Birmingham, AL, USA

My Posts This: Topic  Forum		Also the stock setup will hold up well with 95mm tail blades, the issues started popping up when folks started using 105's.
10-05-2009 03:38 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Rymps
Veteran
Location: Indianapolis

My Posts This: Topic  Forum		Didn't the kit come with 105s? I have run 105s with the stock set up. It is just fine.
10-05-2009 05:58 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
airboss
Elite Veteran
Location: OC ,california

My Posts This: Topic  Forum		go to a commercial supply hardware store for high grade screws. mine were located at "McFadden-Dale Hardware" and are grade #8

OCRM....flyBlackstarr.org.
10-05-2009 06:55 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Helico-pteron
Senior Heliman
Location: Northeast Illinois

My Posts This: Topic  Forum
Quote 
Didn't the kit come with 105s? I have run 105s with the stock set up. It is just fine.
The new kits come with 95s.

Synergy HZ | Synergy SR
10-05-2009 10:18 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
bkervaski
Key Veteran
Location: Birmingham, AL, USA

My Posts This: Topic  Forum		The kit comes with 95's. Folks quickly started putting on 105's and sheering the bolts.
10-05-2009 11:27 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Chuckie
Key Veteran
Location: Crofton Maryland, MHA member

My Posts This: Topic  Forum		No, when the kits first came out in July 2006 they were stocked with 105mm SAB tail blades. If the kits now come with 95mm blades that's a recent change, ie this year.

I've used Radix 105mms for more than 3 years on my N9s and had no issues with the stock hub. However, for safety reasons this year I upgraded one of my N9s with the new hub and on the other I kept the stock hub but installed the hyper tail blade holders. They work with either short or long hub.

For good quality screws and set screws see the RR advertiser RTL Fasteners.

Please stand by for faster service!
10-06-2009 12:17 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
ch-47c
Key Veteran
Location: san jose, ca

My Posts This: Topic  Forum		My hub is stock with SAB 105mm no problems. I've had the new hub in my spares box for over a year, but haven't changed it out yet.

+1 RTL Fasteners
10-06-2009 12:33 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
1 page252 viewsPOST REPLY
Hobby Hut . Heli Wholesaler . JR-Spektrum

.
.
Synergy R/C Synergy N9 > Stock tail hub?
 
 
Helico-pteron
Senior Heliman
Location: Northeast Illinois

My Posts This: Topic  Forum		Thanks guys

Synergy HZ | Synergy SR
10-06-2009 01:34 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
1 page252 viewsPOST REPLY
CANOMOD . Experience RC . Heli-Max

.
.
Synergy R/C Synergy N9 > Stock tail hub?
 Print TOPIC Advertisers 

Subscribe to This Topic

Sunday, November 22 - 11:58 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF