rbort Elite Veteran Location: Franklin, MA - U.S.A.
My Posts This: Topic Forum | Stator GatorI use the Stator gator on one of my gassers, the other I use the stock sensor. I was thinking of switching it to the stator gator on the other machine because the wire on my sensor broke at the circuit board over time and I had to resolder it a couple of times to get it working again.
Yes it is the easiest way to get the gv-1 working (that's why I use it one the 1005) and on the vario's motor (G230RC) it plugs right into the button that usually kills the motor. You would start the motor, and if it doesn't read you just reverse the wires on the plug.
-=>Raja.
1005 Gasser, G26 3DMax++, 2205+ flights Spectra-g, G26 3DMax, 870+ flights |