RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 408 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page431 viewsPOST REPLY
Power Helis . CANOMOD . Experience RC

.
.
e-E-Flite Blade MSR CP CX MCX 400-3D > Blade MCX MSR "wallows" forwards and backwards
 
 
Jasperman
Heliman
Location: Ohio

My Posts This: Topic  Forum		Had my MSR about a month and it flew great.
I have let many non pilots fly it and I think introduced another potential pilot to our hobby.
Unfortunately the little bird has developed a "a wallow" forwards and backwards.
I got a new swash today but this has not solved the problem.
Not sure where to go next. Anyone had the same problem?

Thanks
09-27-2009 09:58 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
briangp
Senior Heliman
Location: Buzzard's Bay, MA USA

My Posts This: Topic  Forum		I always have to ask the stupid question, did you use the swash leveling tool? Check for binding in the flybar, its pretty typical after a few crashes for most people. If it doesn't move freely under its own weight, than use the tool or install a new one. Other than that, I really can't think of what else it would be. I've never seen or heard of it doing that before.

I need one of those to fly in my office. Tried to fly my .90 in there but man is my wife pissed now!
09-29-2009 05:51 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
TachyonDriver
Key Veteran
Location: Chipping, Lancs, UK

My Posts This: Topic  Forum		My mate's mSR developed quite a bad TBE after he replaced the flybar. It turns out the blade grips were binding on the feathering shaft due to him tightening the screws up too much. No binding = no TBE.

Tach.

Little Spinning Bundle of Joy® DON'T DISS THE DINO!!
09-30-2009 01:11 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
gordo high
Senior Heliman
Location: down yonder in the south

My Posts This: Topic  Forum		Check the little plastic nuts that hold the servo shaft from sliding out, it might have moved causing slop in the servo, just a thought.

Honey, I just need this one more thing and then I'm set..
10-21-2009 02:22 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
1 page431 viewsPOST REPLY
Heli-Max . Hobby Hut . Heli Wholesaler

.
.
e-E-Flite Blade MSR CP CX MCX 400-3D > Blade MCX MSR "wallows" forwards and backwards
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 8:49 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF