RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 827 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page420 viewsPOST REPLY
Heli Wholesaler . JR-Spektrum . E-flite

.
.
Synergy R/C Synergy N9 > HyperBar
 
 
inkspot1967
rrProfessor
Location: cranston ri.

My Posts This: Topic  Forum		anyone know where i can get me a HyperBar.....?

cant find one anywhere?

Crashing hitting the ground is easy...Hitting the windsock takes skill..!
FBH Synergy N9
Rave
09-15-2009 10:51 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Helico-pteron
Senior Heliman
Location: Northeast Illinois

My Posts This: Topic  Forum		Call them, they should get you what you need. The 700 flybar works as well, just 75mm longer. Same length as the 5mm bar BTW.

Hyperformance RC, LLC
Oak Brook, IL 60523

Email: info@hyperformancerc.com

Phone: 630-757-1080
Fax: 630-757-1080

Synergy HZ | Synergy SR
09-15-2009 10:58 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
inkspot1967
rrProfessor
Location: cranston ri.

My Posts This: Topic  Forum		thx

Crashing hitting the ground is easy...Hitting the windsock takes skill..!
FBH Synergy N9
Rave
09-15-2009 11:05 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
baddynergy
Elite Veteran
Location: valencia, ca- usa

My Posts This: Topic  Forum		I got a spare couple if you need one, if hyper doesnt.

**Unattended children will be givin a shot of espresso and a puppy**
09-16-2009 02:07 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
J-Money
Heliman
Location: chicago

My Posts This: Topic  Forum		Inkspot it's jay bud I may have 2 otherwise I'll talk to j rock pm me u must have a n9 welcome back
09-16-2009 03:26 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
GScott
Key Veteran
Location: Lewis Center, OH

My Posts This: Topic  Forum		If you are just looking for the actual flybar you can try one from the Kasama Srimok. They come in 2 sizes, one around 495mm and a 520mm version.
09-16-2009 03:00 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
inkspot1967
rrProfessor
Location: cranston ri.

My Posts This: Topic  Forum		im looking for a complete kit i called and left a message for him and emailed no answer back. i needed it by this friday looks like its not going to happen

Crashing hitting the ground is easy...Hitting the windsock takes skill..!
FBH Synergy N9
Rave
09-16-2009 07:04 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
mlevings
Senior Heliman
Location: Claremore, OK

My Posts This: Topic  Forum		Just use a trex 700 flybar and two 5mm to 4mm sleeves like what comes with radix blades to fit the 4mm flybar. It works great.
09-16-2009 07:20 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
GScott
Key Veteran
Location: Lewis Center, OH

My Posts This: Topic  Forum		I know you wanted the Hyper version but I would also check your LHS or Home Depot/Lowes for some 5mm aluminum tubing. Tower has some K&S 5mm tubes so maybe a hobby store or crafts store would carry them.
09-16-2009 07:26 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
inkspot1967
rrProfessor
Location: cranston ri.

My Posts This: Topic  Forum		ok i have the spacer from blades how do i install it? how are they attached?

Crashing hitting the ground is easy...Hitting the windsock takes skill..!
FBH Synergy N9
Rave
09-16-2009 08:03 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
mlevings
Senior Heliman
Location: Claremore, OK

My Posts This: Topic  Forum		slide one over each end of the flybar once it is installed on the heli. Push them into the sesaw and under the bearing. Remove the setscrews and mark on the sleeve where the setscrew goes. Remove the sleeves and drill a hole in the sleeve for the setscrew to pass thru. Reassemble and fly.
09-16-2009 08:17 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Jag72
Elite Veteran
Location: 20 minutes south of Boston Mass...

My Posts This: Topic  Forum		Flybar?

People still use these?
09-16-2009 08:19 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
inkspot1967
rrProfessor
Location: cranston ri.

My Posts This: Topic  Forum		ok thx i thought it needed to be drilled

Crashing hitting the ground is easy...Hitting the windsock takes skill..!
FBH Synergy N9
Rave
09-16-2009 08:39 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
1 page420 viewsPOST REPLY
Fast Lad Performance . Ace Hobby . Esprit Model

.
.
Synergy R/C Synergy N9 > HyperBar
 
 
BobOD
Heliman
Location: Suffern, New York- USA

My Posts This: Topic  Forum		Hey Jag, there will always be vintage collectors.

Bob
IČ RC
09-16-2009 09:20 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page420 viewsPOST REPLY
Heli Wholesaler . JR-Spektrum . E-flite

.
.
Synergy R/C Synergy N9 > HyperBar
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 7:56 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF