Entityofme1
Senior Heliman
Location: Birmingham, AL.
My Posts This: Topic Forum | I'm assuming most people run the see-saw mix in the middle hole and you are also using the boto mixers with the middle hole as well. That being said, there are tons of different combinations one could use with see- saw mix, fly-bar paddles, boto mixers, kasama mixers, flybar size 4/5 mm, and main blades to make this helicopter fly almost any way you want. I use my see-saw to its full potential by starting in the inner hole which gives quicker response and then working my way out with each tip over or crash that I experience ( I'm cheap). I like flying the model on any of the holes becuase it has enjoyable characteristics throughout the range. As far as the boto mixers are concerned, offering quickness at the expense of stability/ tracking during forward flight, you may want to try going to the outer hole on the see-saw while using them. This may or may not offer a unique combination somewhere between middle hole stability and inner hole hole quickness associated with the stock mixers. It's worth a shot. |
These mods make the n9 fast and still keep it tracking the way we all like. The hyperbar is superfast for in your face smackdown but the n9 loses some of it's tracking and stablity. As for FBL do the second mod with the bonta frames" fbh" it flys allmost Fbl. These I've all tested and work great and make the n9 a whole new Heli.
