RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 865 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
2 pages [ <<    <    ( 1 )     2     NEXT    >> ]1238 viewsPOST REPLY
CarbonXtreme . Midland Helicopters . HeliProz

.
.
e-MSH Protos 500 > Luigi Rungi flying a Protos Flybarless at Ircha2009
 
 
Corrado-Italy
Veteran
Location: Italy

My Posts This: Topic  Forum		Enjoy Luigi flight at Ircha.

He is using a V-Bar converted Protos Carbon

Stock ESC
Stock Motor
Stock SAB Blades


You can find video here, it is fifth down

LUIGI RUNGI

http://runryder.com/helicopter/rrTV...lies/IRCHA2009/




Corrado

Corrado
09-11-2009 01:42 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
Raptile
Senior Heliman
Location: SLOVENIA-Logatec (Europe)

My Posts This: Topic  Forum		Please correct your regulators !!!

The heli rocks nice machine

Regards from neighbors

Futaba FASST 12FG | Raptor 90 V-Max V-BAR 4.0| Protos 500 CF | PiroFreak =)
09-11-2009 03:38 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
drdot
Elite Veteran
Location: So. California, Orange County.

My Posts This: Topic  Forum		fwiw..

Some of the best flying I've seen in a while!!...Luigi rocks!!..

Whole Protos setup looks very tight, looks like the t/r is exceptional!!


John.
09-12-2009 12:16 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
whisperdancer
Senior Heliman
Location: Porto, Portugal

My Posts This: Topic  Forum		Stock pinion?
100% flat TH curve?
09-12-2009 10:02 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Corrado-Italy
Veteran
Location: Italy

My Posts This: Topic  Forum		YES
YES


Corrado

Corrado
09-12-2009 10:11 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
tech3rcheli
Senior Heliman
Location: Las Vegas Nv

My Posts This: Topic  Forum		There must be something wrong with my motor! It has power but not that much power! Even on TP 45C prototype packs! The head speed is lower on 15T pinion and 100% flat than in that video.. By the way Corrado! I got my protos flying and it is great! Had a very close call when my pitch locked up in flight I barley was able to land it! What seems to be the problem is the washout block is VERY tight on the pins! I can lift the heli by the washout without it moving on the pins!
09-13-2009 03:31 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
whisperdancer
Senior Heliman
Location: Porto, Portugal

My Posts This: Topic  Forum		It should have... The 15T pinion gives a higher HS, and the bog is the same as with the 14T pinion.
Last week I met a guy flying the protos with stock esc, stock blades, stock everything, with TP 6s 2650 40C batteries and 16T pinion with 100% TH. He never had a problem with it...
09-13-2009 11:29 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
dizzymarkus
Senior Heliman
Location: Oswego, NY

My Posts This: Topic  Forum		I ran the first 10 cycles on mine all totally stock using 6s 2650 30c
15T
gooooobs of power but there was a price to pay ;0( - batts came down smoking, ESC and Motor also but they seemed to take it ;0) and 4min flight times. I have since changed to the 14T 100 - 90 - 100 and she loves it lol


Most awsome bird- congrats goes out to Corrado-Italy and his fellows
Markus

I reject your reality and substitute my own :0)
09-13-2009 12:48 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
moshen
Heliman
Location: San Francisco

My Posts This: Topic  Forum		Corrado:

Will you post the VBar 4.0 config for mini-vbar for us? Also on track for FBL kit in Oct?

Thanks.
09-14-2009 04:57 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
labont
New Heliman
Location: orrawa, ont, canada

My Posts This: Topic  Forum		I was running new Turnigy 20C 3000mah packs on stock everything and the packs were coming down soooo hot. One started to puff but it settled back down once I let it cool. I order a 14 pinion to make life easier on them and it has worked. But I don't have enough power with the 20c to do tic tocs. I have order a couple 30c packs from hobbyking and might put the 15 tooth back on and just tame down the pitch to 10-10 or something.
09-18-2009 07:42 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

My Posts This: Topic  Forum		Nice flying indeed great control throughout piro maneuvers, appears the Mikado V-Stabi unit gives the heli much better flying characteristics over stock flybar for sure, nice work and skillset of the pilot, thanks for sharing.

...Once upon a time there were Nitros, flybars and frequency pins...
09-18-2009 08:29 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
joecarnine
Heliman
Location: Putrajaya - Malaysia

My Posts This: Topic  Forum

youtubed!

Trex 500ESP and the excellence MSH Protos 500, Hirobo SDX50
10-21-2009 02:59 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
blbills
Key Veteran
Location: Provo, UT

My Posts This: Topic  Forum		Can anyone post pictures of this head?

Brian
11-08-2009 08:57 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
SCC
Heliman
Location: Mobile, Al. USA

My Posts This: Topic  Forum		I'm new to the SMH500 Protos and fix'n to lay the $$$ down on one. Someone give me a great shopping list of pinions, batt, motor, parts etc. for a kickbutt flying heli. Please help...need a great shopping list.
11-08-2009 12:03 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
dizzymarkus
Senior Heliman
Location: Oswego, NY

My Posts This: Topic  Forum		stock motor / esc blades
Futaba 9650 cyclics
Inertia 860 (awsome gyro so far) -- Futaba 9254
Flightmax 2650 6s 25c

pretty basic setup and I get 4.5 minutes of letting er EAT HEHEHEHE

Markus

I reject your reality and substitute my own :0)
11-08-2009 01:40 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
whoamis
Senior Heliman
Location: san francisco, ca

My Posts This: Topic  Forum		dizzy, you running 6s on the stock 15t pinion?

tach that?
11-08-2009 07:52 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

My Posts This: Topic  Forum		Corrado, what distance are the balls on Luigis setup for the Mini V on cyclic servos?, 14mm or what is the confirm on his file on your site for distance? Thx

...Once upon a time there were Nitros, flybars and frequency pins...
11-17-2009 04:54 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
MSHeli
rrAdvertiser
Location: Saronno (VA) - ITALY

My Posts This: Topic  Forum		He is using 14mm in that video.


Corrado
11-17-2009 07:29 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

My Posts This: Topic  Forum		Thx...

In reviewing the vstabi file on your site, I assume it is not the one Luigi is running correct? One on your site has a 8900 etc as listed for tr servo etc, is Luigis file viewable for public?

...Once upon a time there were Nitros, flybars and frequency pins...
11-17-2009 08:10 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
MSHeli
rrAdvertiser
Location: Saronno (VA) - ITALY

My Posts This: Topic  Forum		That on the video is the file we have on the site (at least 99% similar), we just changed over to a regular tail servo before publishing it because we tought majority of people wouldn't use narrow band servos.


regards,


Corrado
11-17-2009 09:04 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
2 pages [ <<    <    ( 1 )     2     NEXT    >> ]1238 viewsPOST REPLY
Ron’s HeliProz South . MTA Hobbies . Model Rectifier Corp

.
.
e-MSH Protos 500 > Luigi Rungi flying a Protos Flybarless at Ircha2009
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 10:11 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF