RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 826 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page135 viewsPOST REPLY
Esprit Model . Thunder Power RC . Mikado Modellhubschrauber

.
.
Synergy R/C Synergy N9 > Removing seesaw bearings
 
 
GScott
Key Veteran
Location: Lewis Center, OH

My Posts This: Topic  Forum		What's the trick to getting the bearings out of the end of the seesaw? I tried heating it in the oven but they won't budge.
09-10-2009 03:38 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
cdrking
Elite Veteran
Location: Seattle

My Posts This: Topic  Forum		You may have to use more localized heat, i.e., butane torch. Also a small arbor press really does come in handy for many jobs on the N9 and any heli really. I use mine often.

Are you doing the double bearing mod or just changing bearings?

Jeff

To hover is divine, the alternative is rather PLANE.
09-10-2009 04:16 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Shawn Pierce
Veteran
Location: Galliano, Louisiana

My Posts This: Topic  Forum		I used a old allen wrench on mine, kinda hooked it on the inside. I had to cut it with a dremel to fit inside.
09-10-2009 11:55 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Chuckie
Key Veteran
Location: Crofton Maryland, MHA member

My Posts This: Topic  Forum		Take a screw driver and pry them out slowly. Work all the sides and after a few mintues you will get them out. No heat is needed.

Please stand by for faster service!
09-10-2009 01:18 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page135 viewsPOST REPLY
Futaba-RC . Boca Bearings . XHELI.COM

.
.
Synergy R/C Synergy N9 > Removing seesaw bearings
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 5:03 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF