RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 888 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page803 viewsPOST REPLY
CarbonXtreme . Midland Helicopters . HeliProz

.
.
Kasama Srimok 90 > Do Srimok servo "wheels" only fit JR and Futaba servos?
 
 
husafreak
Veteran
Location: NorCal

My Posts This: Topic  Forum		I saw in the build thread that the Srimok has servo horns for JR or Futaba servos. Do these horns fit other brand servos as well? Hitec/Align/Ino Labs? I know that plastic horns can be jammed on and you think they will work but when you put a load on them they can slip (ask me how I know) but these are metal to metal, they have to be perfect. Thanks
09-02-2009 03:27 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
AltecLansing
Elite Veteran
Location: North Carolina

My Posts This: Topic  Forum		I believe align and ace servos use futaba wheels and arms.

Man, I miss the eighties.
09-02-2009 03:44 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
J3DI
Veteran
Location: Oswestry (52.865648N 3.033982W)

My Posts This: Topic  Forum
Quote 
ace servos use futaba wheels and arms

+1 to confirm...
09-02-2009 09:49 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Mercuriell
Heliman
Location: Sunshine Coast, Queensland, Australia

My Posts This: Topic  Forum		I have used the Futaba blue horns successfully on the ALign 610 servos - they are a bit tight and you have to pull them down onto the splines using the servo arm screw - removal requires a bit of careful levering with a ball link plier

John - MA - Kasama - Logo - Compass
09-02-2009 11:03 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
husafreak
Veteran
Location: NorCal

My Posts This: Topic  Forum		Well, they may be a perfect match then, in my experience aluminum servo horns are usually a very tight fit on the servos they are designed for. Specifically, I am hoping to hear a yeah or neigh about the Hitec servos, no sense waiting on the new 8v heli servos if I can't use them anyway!
09-02-2009 03:46 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Hawken
Heliman
Location: Vic, Australia

My Posts This: Topic  Forum		I believe the Hitec servos have a different spline to Futaba and JR
09-03-2009 07:36 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Git
Veteran
Location: Brunei

My Posts This: Topic  Forum		+1 hitecs are different

however, i believe that the aligns are sligthly bigger than the futabas and couldn't get them blue ones to go in 100% into my aligns 610s.

i found this on the quick uk aluminum wheels and single arm servo horns as well. once i forced them into the aligns, they wont fit into futaba nicely anymore. i experienced this during swapping my futabas to align and back again.

Born to fly, forced to work
09-03-2009 07:51 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Mercuriell
Heliman
Location: Sunshine Coast, Queensland, Australia

My Posts This: Topic  Forum		Hitec servos output shafts are very slightly different from JR - in practice you do seem to be able to fit JR arms onto Hitec OP shafts


John - MA - Kasama - Logo - Compass
09-03-2009 10:24 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
bjacks
Veteran
Location: Ft. Worth, Tex.

My Posts This: Topic  Forum		Srimok

I would not use JR arms on Hitec servos, there not the same, when I race cars some of the guys would put JR arms on Hitec servos and after 4 or 5 races they would strip.(not the gears but output shaft)Bobby
09-03-2009 11:22 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
J3DI
Veteran
Location: Oswestry (52.865648N 3.033982W)

My Posts This: Topic  Forum		Yes, i've also seen JR arms slip when used on Hitec Servos, they fit but not well enough.
09-04-2009 10:09 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
jameswilliam
Senior Heliman
Location: singapore

My Posts This: Topic  Forum		How about using Savox servos anyone....?
10-07-2009 06:20 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
TmMugen
Key Veteran
Location: Tiny Little Red Dot aka Singapore

My Posts This: Topic  Forum		Oh..My srimok buddy is building..

Roger's Crash Counter: 09 last dated 1 Sept 2009. Why I can't do 3D?
10-08-2009 02:54 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Adam Turner
Heliman
Location: England

My Posts This: Topic  Forum
Quote 
How about using Savox servos anyone....?
Savox are the same servo as the Align, just use the blue Futaba arms.

www.adsheli.com, KASAMA Team, V-blades, Spectrum, CSM
10-08-2009 11:13 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
husafreak
Veteran
Location: NorCal

My Posts This: Topic  Forum		I ended up getting JR 8717 and Futaba BLS servos. Plus an Align 610 for throttle.
10-09-2009 02:23 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
1 page803 viewsPOST REPLY
Ron’s HeliProz South . MTA Hobbies . Model Rectifier Corp

.
.
Kasama Srimok 90 > Do Srimok servo "wheels" only fit JR and Futaba servos?
 
 
Jeff polisena
Key Veteran
Location: westpalmbeachflorida usa

My Posts This: Topic  Forum		Typically there are two splines Futaba ,JR . No matter what servo you are using either the blue or red will work .

I dont know how to fly just how to not crash !!!!!
10-16-2009 02:41 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page803 viewsPOST REPLY
CarbonXtreme . Midland Helicopters . HeliProz

.
.
Kasama Srimok 90 > Do Srimok servo "wheels" only fit JR and Futaba servos?
 Print TOPIC Advertisers 

Subscribe to This Topic

Tuesday, November 24 - 3:45 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF