RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 744 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
2 pages [ <<    <     1     ( 2 )    >    >> ]1312 viewsPOST REPLY
Mikado Modellhubschrauber . Futaba-RC . Boca Bearings

.
.
New & Emerging R/C Helicopters > Big money Flasher 500 still bleeding my wallet....
 
 
mckrackin
Key Veteran
Location: lucasville,ohio USA

My Posts This: Topic  Forum

If you searched all my threads then you know I've only been at this a very short time and I think I'm doing really well for myself.
09-05-2009 02:19 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
NZ_Nitro
Veteran
Location: New Zealand

My Posts This: Topic  Forum		thats right

its not the heli thats at fault its the builder, I dont have a flasher but are considering getting one, its only when I look closer at what you are about to see there is not alot wrong with this heli
Quote 
The bolt is broken off in the spindle.
It was dark and I saw sparks when it went
another lesson for you, dont fly a heli when its dark
09-06-2009 12:48 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
mckrackin
Key Veteran
Location: lucasville,ohio USA

My Posts This: Topic  Forum
Quote 
another lesson for you, dont fly a heli when its dark

Why not?If I can see it all right then why should it bother you?
09-06-2009 01:05 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
NZ_Nitro
Veteran
Location: New Zealand

My Posts This: Topic  Forum		who says it bothers me?

its pretty dumb to fly a heli when you cant see it, your main gear looks like its not been set correctly and has stripped
09-06-2009 03:05 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
mckrackin
Key Veteran
Location: lucasville,ohio USA

My Posts This: Topic  Forum		It melted.The set screw in the pinion crumbled and most of it had fallen out.The pinion was slipping and got hot.
All the fasteners that come with the kit are brittle.

Did I say I couldn't see it?I don't recall saying anything like that.
I wouldn't fly if I couldn't see it.
09-06-2009 03:16 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
NZ_Nitro
Veteran
Location: New Zealand

My Posts This: Topic  Forum		well

Quote 
All the fasteners that come with the kit are brittle.
Mechanic eh? well there is your problem, its not about "torquing them up" like with a car dude OH AS FOR IGNORING ME well I can still change my posts funny thing is you wont see it....... I really hate people who like to wade in and blame the equipment before themselves..... you are the only person who seems to have had this much hassle with this bird....


Oh another question mr Mcracken is your first name PHILL by any chance? Phill Mcracken
09-06-2009 05:17 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
mckrackin
Key Veteran
Location: lucasville,ohio USA

My Posts This: Topic  Forum		I don't over tighten them.They break easily.Two fingers on the driver.

I'm kinda new to helis but I've been a mechanic most of my life and probably have more experience with mechanical fasteners than most people you'll ever meet.
09-06-2009 05:33 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
mckrackin
Key Veteran
Location: lucasville,ohio USA

My Posts This: Topic  Forum		I don't know what you mean by "All these hassles"....

I broke a grub in the pinion so it was slipping and overheated.
A screw broke in the tail and slung a blade.The blade grips were factory installed by the way.

The main shaft came bent.Never even got installed.
The torque tube was bent but usable.
The blades you get with the kit are so imperfect they look like a sock full of cottage cheese.Well,one did.The other is OK looking.
The canopy was warped all to hell and cracked in two places.
There were no threads in one of the flybar paddles.
The auto rotation gear was not round.Checked with calipers and it's oblonged by 1.5mm.
One of the carrier bearings for the main shaft was all but locked up.
All this stuff was like that in the box.

None of this stuff has anything to do with a build.Just crappy stuff.
The grub in the pinion could have been avoided maybe.Maybe not.
09-06-2009 02:02 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
NZ_Nitro
Veteran
Location: New Zealand

My Posts This: Topic  Forum		well

Quote 
The blades you get with the kit are so imperfect they look like a sock full of cottage cheese
post some pics of the blades
09-07-2009 07:41 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
EERIE
Senior Heliman
Location: Coughing Hills, SG, Singapore

My Posts This: Topic  Forum		Flasher is still low cost..

I own a flasher 500. And i cannot deny that for ease of mind, purchasing align parts to replace some of it would be good. To be honest my whole tail unit from blades to the plastic tail blocks are all align. Actually i didnt need to change the whole tail but due to some wrong purchases, i committed on align products, i had to change everything to make it worth the trouble.
Technically i own a half align and half phoenix product. But i have no regrets in getting the flasher, all in all, i still have a wonderful heli at half the cost of a t-rex.
Not to be bias, i fly the Align 450 SE V2 and the Raptor 50 Titan. So this 500 size heli is quite good enough for all the hard flying.

T-REX SE
RAPTOR 50Titan
Flasher 500
9XII(2.4)
Its all fun & games till the bill comes
09-07-2009 10:17 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
mckrackin
Key Veteran
Location: lucasville,ohio USA

My Posts This: Topic  Forum
Quote 
--------------------------------------------------------------------------------

post some pics of the blades

I was going to but the texture doesn't show in the pic.
They are also soft and squishy(like foamies)by the root.One more than the other.
09-07-2009 02:50 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
NZ_Nitro
Veteran
Location: New Zealand

My Posts This: Topic  Forum		yeah whatever

you are full of it mckrackup I am starting to wonder if you are tied up with Align in some way if the blades are as bad as you say a photo will show it.......
09-07-2009 10:09 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
2 pages [ <<    <     1     ( 2 )    >    >> ]1312 viewsPOST REPLY
XHELI.COM . Autography FlightPower . Advantage Hobby

.
.
New & Emerging R/C Helicopters > Big money Flasher 500 still bleeding my wallet....
 
 
mckrackin
Key Veteran
Location: lucasville,ohio USA

My Posts This: Topic  Forum		Nope a photo won't show it.
They're all pitted with air bubbles and there's a lightning bolt looking line down the middle where there may be a dowel or something.
They just look white in a pic.

Maybe I could use a piece of paper and do a charcoal rub of them.
I'll look into that.Don't know if I have anything to use.

Hey coops,if you want to pay postage,I'll send them to you.
I certainly don't want them.
09-07-2009 10:45 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
2 pages [ <<    <     1     ( 2 )    >    >> ]1312 viewsPOST REPLY
Mikado Modellhubschrauber . Futaba-RC . Boca Bearings

.
.
New & Emerging R/C Helicopters > Big money Flasher 500 still bleeding my wallet....
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 4:15 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF