pwood
Key Veteran
Location: Dubai - United Arab Emirates
My Posts This: Topic Forum | Hi guys
I am having a similar issue.
If i fly, land and bring the power to zero and then try to fly again, the rotor will go to about 50 rpm and no more.
I thought it was the esc over heating, so I have tried doing a short (30 sec) flight and it happens. If i just keep flying i can get a complete flight with no issues.
I tried un-plugging the battery and plugging it in again. If i do it immedialty, the problem still occurs. If i wait some time ( about one min ) it is fine.
The esc has worked perfectly for about 40 to 50 flights. It didn't happen before. During the setup phase, you tend to fly for a short time and then land and make an adjustment. The last 20 to 30 flights have been full ,uninterupted, flights. The last few flights, i have tried doing auto's and after the landing, it won't go..... big issue if you need to bail out of a bad auto!!!!
Any ideas?
Regards
Paul |
