RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 706 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page265 viewsPOST REPLY
Midland Helicopters . HeliProz . Ron’s HeliProz South

.
.
QuickWorldWide Ep and Wet Fuel Helis > Help with check engine run out
 
 
HeliMasters
Heliman
Location: miami, florida-USA

My Posts This: Topic  Forum		i have a QWW Dominator with zenoah 20 and would like to know to check engine run out with a dialing indicator. the manual indicates this would help to eliminate engine vibration.
can someone help me out?
thanks, mark
07-18-2009 12:04 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
JuanRodriguez
Elite Veteran
Location: Rochester, New York

My Posts This: Topic  Forum		Mark,

I doubt it seriously that someone will be able to "show you" how to do that over a computer keyboard.....unless someone has a video..........

You're best off finding someone locally that can give you some "hands on" advice......

Good luck !
07-19-2009 01:02 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
MikeInMobile
Key Veteran
Location: Mobile, Alabama

My Posts This: Topic  Forum		Arrach the engine in a vise, and remove the glow plug. Next, attach the dial indicator so that it touches the BOTTOM of the fan, and shows zero runout (The dial indicator should be setup so that half of it's travel is used). Rotate the fan, and check the runout of the fan. Adjust the fan so that there is as little runout as possible.
07-19-2009 08:14 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page265 viewsPOST REPLY
MTA Hobbies . Model Rectifier Corp . ReadyHeli

.
.
QuickWorldWide Ep and Wet Fuel Helis > Help with check engine run out
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 4:20 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF