RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 733 ONLINE 80 EVENTS SEARCH REGISTER  START HERE
 
1 page191 viewsPOST REPLY
CANOMOD . Experience RC . Heli-Max

.
.
Thunder Tiger Raptors 30-90 - Imperio > RAPTOR 30 Start shaft still turning
 
 
Mighty Mouse
Senior Heliman
Location: Picayune, MS

My Posts This: Topic  Forum		Is the start shaft and 6mm socket still suppose to turn after the engine starts? After it starts and I take the starter wand off, it continues to turn with engine speed. Thanks.

Here I come to save the day !!!
07-12-2009 07:58 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
kc8qpu
Veteran
Location: Hudsonville,MI, USA

My Posts This: Topic  Forum		Yes.

Bring back the rotary phone so we don't have to press "1" to proceed to ENGLISH.
07-12-2009 08:27 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
BarracudaHockey
rrMaster
Location: Jacksonville FL

My Posts This: Topic  Forum		Well, no not really but it will spin due to bearing drag.

If you can put your finger on it and it stops w/o any resistance then its fine. If the motor stalls or its pulling at your finger then the engine isn't aligned optimally.


AMA 77227
http://www.jaxrc.com
07-13-2009 03:17 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
SC Raptorman
Veteran
Location: South Carolina

My Posts This: Topic  Forum		I always turn the start shaft as I'm tightening the motor up to the frame and try to keep it turning free as possible .

Oh what a feeling flying 3D can be
07-13-2009 03:41 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
dsl11us
Heliman
Location: drums pa usa

My Posts This: Topic  Forum		Try cleaning the clutch oneway and start shaft bearings. make sure they are smooth if they feel notchy or rough replace them.
07-14-2009 03:03 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page191 viewsPOST REPLY
Hobby Hut . Heli Wholesaler . JR-Spektrum

.
.
Thunder Tiger Raptors 30-90 - Imperio > RAPTOR 30 Start shaft still turning
 Print TOPIC Advertisers 

Subscribe to This Topic

Saturday, March 20 - 10:24 pm - Copyright © 2000 - 2010 runryder.com | email | link to rr | START HERE | NF