RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 785 ONLINE 80 EVENTS SEARCH REGISTER  START HERE
 
1 page213 viewsPOST REPLY
JR-Spektrum . E-flite . Fast Lad Performance

.
.
Thunder Tiger Raptors 30-90 - Imperio > RAPTOR 50 Tail blow out on inverted tail in FFF
 
 
towertsk
Senior Heliman
Location: Chula Vista, CA

My Posts This: Topic  Forum
I'm having trouble setting up my tail. On collective pumps it rock solid, but on tail in inverted FFF it blows out? I have the following:

Spartan
DS20GMD
K&B tail blades.

Not sure whats going on. I've tried to move the ball in (closer to screw) and increase travel and gain, with no benifit. I'm fairly new, and not sure if my tail is setup correctly.

Thanks
07-08-2009 10:31 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
A. Bundy
Elite Veteran
Location: Aurora,IL. 30W/SW of Chicago

My Posts This: Topic  Forum
Make sure you got good high HS and don't load the motor up in BINV fast flight or you will lose the tail.
07-08-2009 10:37 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Pull-n-Pitch
Key Veteran
Location: Mt. Dora, Florida (USA)

My Posts This: Topic  Forum
-On the Spartan what are your current Gain settings?
-On the governor what is the head speed when it blows out inverted?
-Fill out your profile so we have more information on you as to what size helo, what type engine, etc, etc, etc,

Information given is minimal looking for a definitive answer.

Pull-n-Pitch
T.O.R.C.H.S. Orlando Member
07-09-2009 04:05 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
towertsk
Senior Heliman
Location: Chula Vista, CA

My Posts This: Topic  Forum
I just bought a gov, but i've been flying with out one. So i'm not sure what the head speed is?

I have the gear channel tied to the gain
+45
-60 (not sure why I have this value)
07-09-2009 05:56 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Dino Spadaccini
Key Veteran
Location: USA

My Posts This: Topic  Forum
tail

good head speed is 2050 ish.

the spartan cant help there sorry

after you get the gover in and set try it out if it still blow out try a set of carbon tail blades you can run 95mm tails with 600 main blades.

Team Thunder Tiger
Team Futaba
CY Enterprises
Morgan fuel
07-09-2009 01:26 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
towertsk
Senior Heliman
Location: Chula Vista, CA

My Posts This: Topic  Forum
What about adding the 8 tooth gohbee tail to up the ratio? i read that somewhere and was thinking about giving it a try?

I have a metal head block to 2K HS should be doable. I'll try it this weekend and report back
07-09-2009 08:52 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Swoop
Key Veteran
Location: Newark, DE USA

My Posts This: Topic  Forum
Quote 
What about adding the 8 tooth gohbee tail to up the ratio? i read that somewhere and was thinking about giving it a try?

No, you don't need it. Find someone with a tach and verify your headspeed. Once you know you have sufficient tailspeed, you can go back to adjusting mech/electronic gain.

The KandB tailblades are decent but no substitute for good carbons. It would be 25 bucks well spent

Chris
Titan,Kasama,MP5,Radix
Trex450SE,MavrikkG5,Phoenix35
07-12-2009 03:38 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page213 viewsPOST REPLY
Ace Hobby . Thunder Power RC . Mikado Modellhubschrauber

.
.
Thunder Tiger Raptors 30-90 - Imperio > RAPTOR 50 Tail blow out on inverted tail in FFF
 Print TOPIC Advertisers 

Subscribe to This Topic

Saturday, March 20 - 2:58 am - Copyright © 2000 - 2010 runryder.com | email | link to rr | START HERE | NF