karman
Senior Heliman
Location: Cape Town, South Africa
My Posts This: Topic Forum | Hi All
Been playing with 3s1p 2300 A123 pack on the Beam with JGF 500th motor with 14t pinnion (my normal lipo setup). Done 11 flights now and the first few flights was bit dissapointing..
After upping cyclics a bit due to lower head speed as well as the fact that the a123 need some cycles to get going, the last 3 flights was a blast.
Loops and rolls, stall turns are easily possible. Tic tocs are possible if you are used to 50 nitro power.. need to nurse the collective ;-). FF etc no problem, small funnels, large funnels, inverted etc are all possible.
I uploaded all the Eagle tree results for the 1,2,3 and 10th cycle to
http://www.rchq.co.za/e107_plugins/...topic.php?55100 .
Much better quality jpg's.
If you not able to access link, please let me know.
Ave amp draw, 17 amps. Peak 34.. Flight time, ave 6 1/2 Fig 8, rolls etc. and about 7 - 7 1/2 hovering and slow fig 8's.
Ave recharge time 17 - 20 min at 3C. Can cope with 5C and thats about 12 min recharge.
I would not recommend it for 3D flying, but normal acro and sport flying its perfect!!
I'll try get some video's this weekend.
Cheers
L:
___________________
K3D, ???
|
