Busher
Key Veteran
Location: Manchester, England
My Posts This: Topic Forum | | Quote |
| Perhaps not in every case, but in some cases there is a noticable difference. I run Coolpower 30% (non-LS). It's oil content is 22%. Coolpower 15% (Standard Heli) on the other hand has a 17% oil content. The 15% Coolpower has approximatley 23% less oil than the 30% Coolpower. (If my math is correct)
|
It would make a difference if the oil in the 2 fuels were the same same viscosity.
The 23 % oil is lower viscosity oil and therefore more is required, the 17% oil is a higher viscisity oil and therefore less is required.
18% high viscosity oil is plenty even at 30% nitro. However I would prefer slightly more oil if a lower viscosity was used, then I would prefer 20% oil or more.
Good luck
Busher |
