RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 329 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page388 viewsPOST REPLY
JR-Spektrum . E-flite . Fast Lad Performance

.
.
Aerial Photography and Video > another helicommand question
 
 
djdaveq
Senior Heliman
Location: new york new york usa

My Posts This: Topic  Forum		hey men, i got my helicommand 3A set up on a joker 2 with the 120 swash settting. everything works right in the tilting of the machine, and all shows up right in the diagnose tab. EXCEPT the collective pitch is revered, when i go full up on collective, the heli does the right thing mechanically, but the diagnose tab says the positive that its going down in pitch. will this cause a problem for me? thanks.
06-27-2009 07:46 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
rroback
Elite Veteran
Location: Irvine (UCI), Ca

My Posts This: Topic  Forum		the collective won't cause a problem with a regular HC, but would with a profi, and altitude hold. I'd fix any anyway. Without being near a HC, I think you need to do something like reverse the channel on your tx, and then reverse the channel in the hc settings?

Rhett..... I can't fly, but the Profi sure can.
06-27-2009 08:04 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
djdaveq
Senior Heliman
Location: new york new york usa

My Posts This: Topic  Forum		yea i reverse the tx setting and then it the diagnose reads correctly but the helis head goes the wrong way on the collective. i messed around with many options reversing and so on with all settings with the same results.

will this one thing wrong affect failsafe or position hold on the 3A? the 3A does not try and hold alt (optically) while in position hold does it?
06-27-2009 08:21 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
rerazor
Elite Veteran
Location: Mich.

My Posts This: Topic  Forum		I would get it right before flying. Nooobs should chime in. I can't remember but I think with the Joker I had to switch the servo plugs and re-adjust everything again. Can't remember but there is a solution to the riddle.

Robert
N.A. DJI Distributor
06-27-2009 08:31 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
nooobsElite Veteran - Location: Toronto, Canada - My Posts This: Topic  Forum
Dave

On your TX do not reverse any servos. Do all the reversing on the HC software.

You'll have to play with the Mixer and RX&Trim tabs. Make one change at a time and monitor your changes on the Diagnose tab.

Forget about the optical feature on the 3A. That's only good on low level hovers between 3 - 5 ft.

Make sure you've set the swash as shown.




Here are the Mixer tab settings.



Here are the RC&Trim tab settings.
06-27-2009 09:34 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
Evil VV
Heliman
Location: Ottawa, Ontario - Canada

My Posts This: Topic  Forum		nooobs, you are the best!

I had to figure all this out by myself, i should of asked you
06-28-2009 06:42 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
djdaveq
Senior Heliman
Location: new york new york usa

My Posts This: Topic  Forum		holy @&*$ Noobs! WOW that will help tons. let me try it when i wake up for breakfast. ill let you know how it tastes! thanks man
06-28-2009 09:56 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
djdaveq
Senior Heliman
Location: new york new york usa

My Posts This: Topic  Forum		sorry to say i messed with it all morning and it did not work, maybe our servos are setup different something. im using futaba.
06-28-2009 06:14 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
rroback
Elite Veteran
Location: Irvine (UCI), Ca

My Posts This: Topic  Forum		did you reverse the collective channel on your tx, and the reverse the pitch collective channel on the hc?

Rhett..... I can't fly, but the Profi sure can.
06-28-2009 06:46 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
djdaveq
Senior Heliman
Location: new york new york usa

My Posts This: Topic  Forum		im pretty sure i did. i can try it again. but somewhere it says not to reverse anything on your tx. doesn't it?
06-30-2009 07:31 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
torenhg
Senior Heliman
Location: Milwaukie, OR

My Posts This: Topic  Forum		great thread, I am building a Spectra G and a HC Rigid was included in the purchase. It was set-up for FBLess but I am returning it back to normal. Was thinking about putting the HC on the bird to see how it works

Is there a thread that goes over the HC setup?

Blade 400-3D
Shuttle ZXX
MinAir Fury
MinAir Spectra G (In Build)
07-04-2009 02:29 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page388 viewsPOST REPLY
Ace Hobby . Esprit Model . Thunder Power RC

.
.
Aerial Photography and Video > another helicommand question
 Print TOPIC Advertisers 

Subscribe to This Topic

Tuesday, November 24 - 8:50 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF