darkfa8
Key Veteran
Location: Eatontown, NJ - USA
My Posts This: Topic Forum | I'm contemplating a Swift build that I want to be able to have enough power to practice 3D, swing 600mm blades and have as long a flight time as possible.
I'm not sure which Swift airframe to start with, though the 620se is the hotness, I'm not sure if it's $100 worth of hotness over the 550 with a 620 boom and belt... any insight?
As far as components:
Gyrobot 700
MKS 8910 tail servo (4.8v: .054/2.01 kg-cm)
MKS 9660 A+ cyclics (6v: .098/4.7 kg-cm)
Kontronik ESC or Scorpion ESC
Western Robotics BEC (Mini or High Current version)
Not sure on motor, but am looking at Neu, Scorpion, Xera
Lipo power (probably Zippy 30C): 6s
Futaba R617FS RX
Main blades: Mavrikk 600mm G5 Pro Wide Cord or Radix 600
Tail blades: Radix or equivalent
I'd use Custom Heli Products adapters to mount the MKS Mini servos. I think these servos will hold up in a model this light, save weight and overall cost rather than going with standard sized servos and still provide as good, if not better performance.
Input?
- Dan Goldstein - |
)
Yeah I would go 8s or 10s if you are going with 600mm blades. If 6s, go with the 560mm RT................Ron
