SJo1
Heliman
Location: Finland
My Posts This: Topic Forum | Suggestion
Replace your :
-Reciever
-GV1
with Spektrum AR7100R and you have revLimit, regulated/unregulated aux2+rudder+throttle for 5.2v and direct output from li-po to cyclics.
http://www.spektrumrc.com/Products/...odID=SPMAR7100R
Then you will have less wires going around.
I have this setup on mine:
3x8717 cyclic
1x8900G / 3500G throttle
1xBLS251 / 8900G rudd
1xAR7100R
1xSpartan 760 / Fut GY520 / G370 3D not OK / Gyrobot700 for FBL
1x 4000mAh S2 Li-Po
Just for fun I have tested several gyros and servos on Srimok.
Fut GY520+BLS251 Is a really good combo, hold's like a rock.
JR 370G 3D+8900G I didn't got it hold, it's drifting right, doesn't matter what I did, Rudder lead is really short and passes vibrations to gyro.
Spartan I have not tested yet with BLS251 nor 8900G servo
I have KSM Gyro mount A with Gel pad between plates and thick doubleside tape (spartan)under gyro it self.
For weight saving I will test 3500G on throttle instead of 8900G (current)
-Samppa |
