Git
Veteran
Location: Brunei
My Posts This: Topic Forum | | Quote |
| Here is my serial number: 0900192
|
mine is 0900139  i wonder who got 0900000?
my build advices/ dilemmas:
1. servo grommets for the 2.5mm screws wont fit into the holes on the frame, had to use the 3mm grommet and forgo the brass sleeve.
2. kasama forgot my tail boom support (it's arriving though)
3. no cyberhead manual (i got the flybar version manual) kasama did promise to post it on his web last week but till now.. nada
4. i cant get the clutch to align perfectly (guess must break in the clutch)
5. destroyed the aluminum service cap for tail case. be careful, its very soft aluminum. (kasama sent me another together with my tail boom support)
6. manual doesn't state whether to lube any dampers or not ( i lube mine anyways).
7. do the governor sensor before joining the two frames together..
8. if u planning to use align servos, ditch the blue attachment for futaba. pm me and i will show u wat i did.
9. my sk360 occupied the gyro spot, had to put gyro underneath the rx mount.. (touch wood, no nose down crash)
10. have to drill DIY 2.5mm holes on the tail boom and paint canopy
Born to fly, forced to work |
The last three times a kit I wanted was unavailable I bought something else. I think that's about to happen again!
Otherwise, we all will not see this heli.
and I thought I would get lucky and it would go through..
lol 
