me too. weather permitting.

Just do it.

Where was ever buddy today! It was a nice day.

Just do it.

MIssed out on the flying...

I missed out on a good day to fly...

"But"had a good day doing some off trail biking!

I hope to go up next weekend..

Ron, any photos of anyone flying?

Sorry I left early, if my auto hub wasn't locked up I would have stayed longer. I was looking over this bird I picked up and I noticed A couple of thing that could explain what you were telling me about the tail on it Ali, the fan for one is so out of balance, the regulator is installed in the wrong line for the gy601, and the two sided tape used to mount the gyro sensor to the model has no kind of absorbtion for vibration at all and with this motor I don't think it could ever run right that way, anyway it was just a look at it before I put it up on my shelf to get it out of the way until I get around to tear it down and correct it with some of the mods needed on it. hope to see everyone next week!

Saul

kids weekend for me,,,
we are at Great Wolff Lodge....
fun fun fun....

Gravity Works...no, the other left. ok,ok

Steve is here wow. Did you take your heli with you??

Just do it.

Ali...how'd you know....
but if I had one of those new trex 450 pro's I could have...
hmmmm...not a bad idea....
anyone got one yet?

Gravity Works...no, the other left. ok,ok

RCRCC SHOW & DEMO Clarkstown "July 4th" Celebration & Fireworks

Anyone going to this show for the town? it's on wednsday july 1 about 4 pm.I was there last year and it did'nt go well,could use some back up.Display your helis and if you have electric,fly it for the crowd

Sorry! But I won't be able to make it as the company has had us sign our work schedule for that week and I won't be getting off until 8:00 pm except Friday the 3rd which I will be getting off at 6:00pm

Mark, I'm 50/50 right now...I might be away...

Gravity Works...no, the other left. ok,ok

Hi Guy's!

I don't know how many of you are aware that there was an accident at the XFC this year involving Benny Chi, JC a competing pilot was on deck flying when he lost his tail on his T-rex 700 and hit the ground at full throttle, the main blade weight shot out and hit Benny Chi in the face or head, How severe the injures are is unknown to me at this time. Another reminder that rc heli's are not toy's!

P.S. there is a video on you tube of the crash.

Happy Fathers Day to all

HAPPY FATHER'S DAY TO ALL FELLOW PILOTS.

All I want for fathers day is a sunny day, and a calm wind.

Just do it.

Well maybe next week it will be better for us to fly, until then try to stay dry and enjoy the day!

HAPPY F DAY ALL

happy fathers day too all
and hope benny is ok....

Hi Guys
I hope that everyone is ok and had a great Fathers Day, I haven't had much time to play and as it stands Right now I won't be going out to play this Sunday either as I've been asked to work ( it's double time for me and I can use the $ ) I started to tear down this bird and figured I'd share these photo's of what I found needing imediate attention,

Clutch bad do to liner [PHOTO]/fastphoto/19858/CLUTCH_BELL_LINER.jpg Clutch liner burnt out almost to the metal[/PHOTO][PHOTO]/fastphoto/19858/CLUTCH_LINER_NOT_EVEN_GLUED_PROPERLY.jpg Liner wasn't even glued in properly [/PHOTO] well the fan is just out of balance and to have a out of balance fan on a motor that has a balance issue with it's crank shaft just doesn't work, and I don't know if you can notice that the fan is also cracking at the hub.
clutch liner is deteriated and brittle it's amazing it held out but definetly explains motor overspeeding as the clutch was slipping in flight.
I didn't take pictures of the mixing base w/control levers but I had to replace it too! much to much play! anyway I hope that this wasn't a drag for you guys but more as an informative tool and how we should pay more attention to what our machines are telling us!: all of the above contributed to some symptom that was over looked.
Ok I know thats enough of that!

Saul

haha. It seems to me that Reggie took his frustration on that poor metal fan. Good findings Saul.

Just do it.

It seems to me that Reggie took his frustration on that poor metal fan

lol

We had a good time today. Weather was nice. Alex, Bob, Benny, Justin, Don, Steve, Rafi, and a few new future members showed up. where was everyone else?

Just do it.