RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 752 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
5 pages [ <<    <     3      4     ( 5 )    >    >> ]2896 viewsPOST REPLY
MTA Hobbies . Model Rectifier Corp . ReadyHeli

.
.
Synergy R/C Synergy N9 > How to make a lighter N9 with great power
 
 
Rymps
Veteran
Location: Indianapolis

My Posts This: Topic  Forum

Quote 
Last week I was doing some auto's with aborts a few feet off the ground when the two bolts that connect the main gear to the main shaft, sheared off.

Happened to me twice. I drilled the bolt holes out. I use a bolt from a Trex 600N blade grip. It has a shoulder that gose all the way through. I works great.

I would love to see this heli fly.

Have you ever thought about using a carb smart or some thing like that to control fan speed based head temp? Carb smart to the speed control? Just a thought.
08-25-2009 02:56 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
missle
Senior Heliman
Location: West Chester, Oh

My Posts This: Topic  Forum		Rymps, where you been all my life! LOL
Those are some great ideas and I definately would've used the 600 blade grip bolts had I thought of it. You wouldn't happen to remember their O.D. would you?
As for the carb smart, I've never used one so I'm not familiar with it's capabilities. Does it have a temp sensing function in it?

WATCH OUT!!!!!!!!
08-25-2009 11:08 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
helinewby
Senior Heliman
Location: Mason Ohio

My Posts This: Topic  Forum		ubec

i have two if you need them!

C.B.

stop typing and go burn some more fuel!
08-26-2009 01:38 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Rymps
Veteran
Location: Indianapolis

My Posts This: Topic  Forum
Quote 
You wouldn't happen to remember their O.D. would you?

i think they are 3.8 mm. I just used a drill bit just under 4mm. I useda drill press and turned the speed up to 500 and used some oil and light pressure and it went through. The threads are hardened as well as the shaft.
08-26-2009 02:31 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Rymps
Veteran
Location: Indianapolis

My Posts This: Topic  Forum
Quote 
Does it have a temp sensing function in it?

Yes it dose. i have never used one either, but i think it is a cool idea.
08-26-2009 02:33 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
missle
Senior Heliman
Location: West Chester, Oh

My Posts This: Topic  Forum		Rymps,
Yea I actually went out and bought a drill press just to drill mines (but I'd been wanting one anyways so now I had an excuse).
I guess I'll be ordering one of them carb smart's 2moro after I do some reading up on what all can be programmed for it.
As for the Dayton FF, I don't know anything about it so I'll call a couple of the locals and get the 4-1-1
CB, thanks man but you know I've got electronics out the ying-yang. I just have to figure which one can do the job (better yet, which job)

WATCH OUT!!!!!!!!
08-26-2009 03:44 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
helinewby
Senior Heliman
Location: Mason Ohio

My Posts This: Topic  Forum		Dayton this weekend

Are you coming?

C.B.

stop typing and go burn some more fuel!
08-26-2009 11:54 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
missle
Senior Heliman
Location: West Chester, Oh

My Posts This: Topic  Forum		Definately can't make it Sat but if it's continued thru Sunday, then I'm there. Where's it going to be?

So I stop by the LHS and picked up a TP 1320 3S and wired it into the fan system and to counter that weight, I removed the Fromeco 2S 4800mah pack and made a 2S 3700mah (from a Outrage 3S 3700 pach I had lying around) and wired it in. I'll post some pics in the morning cause it's almost 2 in the morning and I need to wake early so I can GO FLY

WATCH OUT!!!!!!!!
08-27-2009 06:42 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
5 pages [ <<    <     3      4     ( 5 )    >    >> ]2896 viewsPOST REPLY
Power Helis . CANOMOD . Experience RC

.
.
Synergy R/C Synergy N9 > How to make a lighter N9 with great power
 Print TOPIC Advertisers 

Subscribe to This Topic

Saturday, November 21 - 10:42 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF