RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 553 ONLINE 21 EVENTS SEARCH REGISTER  START HERE
 
1 page381 viewsPOST REPLY
MTA Hobbies . Model Rectifier Corp . ReadyHeli

.
.
Blitz Helicopters Avro 90 > Setup question
 
 
V-22 Osprey
Senior Heliman
Location: Albuquerque, NM

My Posts This: Topic  Forum		When set up for Stable I seem to have a fair amount of up/down movement in the grips. Is this the angular movement that is referred to in the manual to allow the blades to cone at lower head speed? It seems like a lot of movement but I’ve never had a heli designed for F3C type flying. There is no lead-lag movement in the grips. Also there is no play in the stack-up on the feathering shaft…grips do not move in or out when pushed or pulled. I have not spooled it up yet as I’m still waiting on a gyro. What do ya think? Thanks!
Setup…Black Inserts, Stable; Trailing Link and 60/90 O-rings
05-03-2009 04:29 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
lok
Heliman
Location: Bangkok, Thailand

My Posts This: Topic  Forum		it's normal just go fly and enjoy.
05-03-2009 05:57 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
V-22 Osprey
Senior Heliman
Location: Albuquerque, NM

My Posts This: Topic  Forum		I am going to pull it apart and double check everything just to get a warm fuzzy. Hope to get a few flights on it this weekend...thanks!
05-03-2009 08:50 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Bond007
Veteran
Location: Leicestershire UK

My Posts This: Topic  Forum		With the stable set up as per the manual, there is a lot of up/down movement on the grips. The damping is quite soft to allow the blades to cone as you state. This allows the disk to move without unsettling the heli when a gust of wind occurs

It is perfeclty ok

Blitz Avro, Align Trex600, Blade MCX
05-04-2009 09:51 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
V-22 Osprey
Senior Heliman
Location: Albuquerque, NM

My Posts This: Topic  Forum		Everything it per the manual but I had to ask befor I put it i the air. Thanks, feeling much better now!
05-04-2009 03:46 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
hdskullfire2
Senior Heliman
Location: Bethlehem, Pa.

My Posts This: Topic  Forum		I did everything as per the manual and I went "Stable" also. I went over everything carefully and it fly's per spec. If you get the head setup just right you will only need a click or two on trim. It just dials in so quickly.

Steve

Your next stop, the Twilight Zone. Now get'a move on....Hey, get me a cold one first..!!
05-05-2009 02:00 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
V-22 Osprey
Senior Heliman
Location: Albuquerque, NM

My Posts This: Topic  Forum		Have you flown with the SG 720s yet?
05-06-2009 07:44 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
hdskullfire2
Senior Heliman
Location: Bethlehem, Pa.

My Posts This: Topic  Forum		Yes...

They fly real nice compared to the temporary 710 3D ones I had on for the initial break-in. Much more stable at lower headspeed and at higher headspeeds as well.

Steve

Your next stop, the Twilight Zone. Now get'a move on....Hey, get me a cold one first..!!
05-07-2009 02:10 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
V-22 Osprey
Senior Heliman
Location: Albuquerque, NM

My Posts This: Topic  Forum		Cool, I just got a nice deal on a set of the blades and the Rotor Tech paddles. How much pitch on the collective and cyclic and what are your head speeds? Are you running your weights inboard or outboard on the flybar?
05-07-2009 02:34 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
hdskullfire2
Senior Heliman
Location: Bethlehem, Pa.

My Posts This: Topic  Forum		My pitch settings are right at what the setup guide called for. Normal mode I'm at 1550, Mode 1, 1700, Mode 2 1850. These are tentative as I'm still setting it up and playing with the various adjustments to see what works best.

I also have the F3C RotorTech paddles. I installed them with the weights all the way out against the paddle.

Steve

Your next stop, the Twilight Zone. Now get'a move on....Hey, get me a cold one first..!!
05-07-2009 02:43 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
1 page381 viewsPOST REPLY
Power Helis . CANOMOD . Experience RC

.
.
Blitz Helicopters Avro 90 > Setup question
 Print TOPIC Advertisers 

Subscribe to This Topic

Wednesday, November 4 - 5:35 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF